GSL-SE Coil Wires to Distributor Cap
#1
rotor toter
Thread Starter
iTrader: (8)
Join Date: Apr 2007
Location: nc
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
GSL-SE Coil Wires to Distributor Cap
I have a question about the stock coil to distributor cap wiring on a GSL-SE. I was looking at mazdaverx713b 's photo of his white GSL-SE engine bay. ( https://www.rx7club.com/1st-generation-specific-1979-1985-18/pic-stock-gsl-se-engine-bay-anyone-649312/ )
The photo shows the front coil wire running to the center post of the distributor cap. On my distributor cap the center post is labeled L (leading). I thought the front coil was the trailing coil. On my car the wire from the REAR coil goes to the center post. I checked my front coil wiring harness . It has a yellow/green wire on one post and a blue rubber boot on the other (trailing connection the way I read the wiring diagram). Which car is correct? Am I just looking at the photo wrong?
The photo shows the front coil wire running to the center post of the distributor cap. On my distributor cap the center post is labeled L (leading). I thought the front coil was the trailing coil. On my car the wire from the REAR coil goes to the center post. I checked my front coil wiring harness . It has a yellow/green wire on one post and a blue rubber boot on the other (trailing connection the way I read the wiring diagram). Which car is correct? Am I just looking at the photo wrong?
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM