GSL-SE clutch to a 12a?
Thread Starter
The infamous number guy!
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
GSL-SE clutch to a 12a?
My clutch in my 12a is slipping, i have a good condition clutch from a 13b in my garage, can this be put in my 12a? I also have a GSL-SE flywheel, so if that's the issue, i have that taken care of.
Old [Sch|F]ool
Joined: May 2001
Posts: 12,869
Likes: 574
From: Cleveland, Ohio, USA
All N/A clutches from '83 to present are interchangeable.
Until this weekend, I had a Series 5 pressure plate and a Series 4 clutch disk on a Series 3 12A.
The difference is, all rotaries '74-82 had 215mm clutches, while all N/A rotaries '83-present have 225mm.
Nowadays, I have an '80 engine with an '81-82 flywheel, so I'm back to a 215mm clutch...
Until this weekend, I had a Series 5 pressure plate and a Series 4 clutch disk on a Series 3 12A.
The difference is, all rotaries '74-82 had 215mm clutches, while all N/A rotaries '83-present have 225mm.
Nowadays, I have an '80 engine with an '81-82 flywheel, so I'm back to a 215mm clutch...
Thread Starter
The infamous number guy!
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Originally Posted by peejay
All N/A clutches from '83 to present are interchangeable.
Until this weekend, I had a Series 5 pressure plate and a Series 4 clutch disk on a Series 3 12A.
The difference is, all rotaries '74-82 had 215mm clutches, while all N/A rotaries '83-present have 225mm.
Nowadays, I have an '80 engine with an '81-82 flywheel, so I'm back to a 215mm clutch...
Until this weekend, I had a Series 5 pressure plate and a Series 4 clutch disk on a Series 3 12A.
The difference is, all rotaries '74-82 had 215mm clutches, while all N/A rotaries '83-present have 225mm.
Nowadays, I have an '80 engine with an '81-82 flywheel, so I'm back to a 215mm clutch...
Thread
Thread Starter
Forum
Replies
Last Post
heywier427
Naturally Aspirated Performance Forum
2
Sep 11, 2015 04:49 PM