1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

gsl logicon

Thread Tools
 
Search this Thread
 
Old Aug 27, 2013 | 07:41 AM
  #1  
cshaw07's Avatar
Thread Starter
I need a cheaper hobby...
Tenured Member 05 Years
iTrader: (14)
 
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
gsl logicon

My logicon doesn't work. No lights, light up or anything. Has anyone repaired theirs? I don't imagin it should be hard as long as it's actually the logicon that is bad. I havent pulled it out and messed with it yet, but is there anything i can check first? I'm not sure if there is a fuse for it seperate from anything else. My radio and everything else works fine and the blower motor blows.
Reply
Old Aug 27, 2013 | 08:27 AM
  #2  
Rotaryhaven's Avatar
Total Rotary Domination!
Tenured Member 15 Years
iTrader: (17)
 
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
there is a fuse in the fusebox for it.....
Reply
Old Aug 27, 2013 | 08:34 AM
  #3  
cshaw07's Avatar
Thread Starter
I need a cheaper hobby...
Tenured Member 05 Years
iTrader: (14)
 
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
for some reason i thought the fuse for it also worked the radio. never mind then.
Reply
Old Aug 27, 2013 | 08:37 AM
  #4  
Rotaryhaven's Avatar
Total Rotary Domination!
Tenured Member 15 Years
iTrader: (17)
 
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
had a problem one day and it turned out to be the fuse......replaced the logicon intially with another known good one and it still didn't work, checked all fuses and found the dead fuse and the logicon started working again......don't know which fuse was it, just replaced it anyway....
Reply
Old Aug 27, 2013 | 08:50 AM
  #5  
cshaw07's Avatar
Thread Starter
I need a cheaper hobby...
Tenured Member 05 Years
iTrader: (14)
 
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
checked all my fuses, they're all fine. My blower works, clock works, radio works, inside lights all work. logicon doesn't work at all. It's not a fuse, it cant be. unless there is a fuse in the logicon itself but i highly doubt that.
Reply
Old Aug 27, 2013 | 12:13 PM
  #6  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
i've never seen a bad one, its not like the FC/Rx8... that being said it probably isn't too complex in there, and B if you need one i've got a few known good spares
Reply
Old Aug 27, 2013 | 12:17 PM
  #7  
cshaw07's Avatar
Thread Starter
I need a cheaper hobby...
Tenured Member 05 Years
iTrader: (14)
 
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
i may need one. I'll probably dig into it here within the next week. i have another car in the garage currently. you have the all digital ones right?
Reply
Old Aug 27, 2013 | 12:58 PM
  #8  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally Posted by cshaw07
i may need one. I'll probably dig into it here within the next week. i have another car in the garage currently. you have the all digital ones right?
yep!
Reply
Old Aug 27, 2013 | 01:01 PM
  #9  
cshaw07's Avatar
Thread Starter
I need a cheaper hobby...
Tenured Member 05 Years
iTrader: (14)
 
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
any idea what you'd want for one? I really dont even need it as i dont drive the car in the winter, but it would be nice to have it light up again and be able to direct all the air to the windshield in the cooler mornings
Reply
Old Aug 27, 2013 | 02:16 PM
  #10  
wankel=awesome's Avatar
carb whisperer
Tenured Member 15 Years
 
Joined: Jan 2008
Posts: 1,485
Likes: 4
From: Greenfield, Ohio
My SE had the same problem! Mine was bc some ******** PO used its 12v source for an aftermarket head unit
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
Oct 1, 2015 09:25 PM




All times are GMT -5. The time now is 12:14 AM.