Sammymatik

What are good things to strip from a junkyard GSL-SE, I wanna be ready if I find anything good


1)fuel injectors
2)LSD rear end, complete
3)Driveshaft
4)bumper skins?

I know I'm missing much.... help fill my shopping list

RacerX7fb

If you get the rear end, get the front strut/brake assemblies as well to match.. on the interior, the electrical switches; power windows, etc.

MosesX605

The front strut/towers/hubs.
All the mag wheels.
rear hubs w/axle.

Every 12A powered RX-7 needs the better wheels/brakes.

Oh...and the engine

Matt
1979 SA22C

brownmound

Everything.

Right on.

Sammymatik

Ok so the rear end is obvious... but the front brake assemlies are better on a GSL-SE? I thought they were the same?

Power windows and swithces is a good one.

The mag wheels... what do these look like again...? I can't find the thread with all the wheel pics!

And the engine u say? I know its a 13b... I don't know much about the SE's, but are these 6port? I know the rebuild prices are a bit higher on the SE''s.

There has gotta be more than this?

680RWHP12A

get the ashtray!!! SE's have HUGE ashtrays!!!!LOL
if the interior is grey get it!!

brownmound

The moonroofs are real swass, if you can find em.

Right on.

RX7145

iTrader: (1)

Also make sure and get:

Fuel Pump
Engine (if it is bad still get it for parts.)
Turn signal wiper switches. (Under steering wheel)
Windsheild wiper rack.
Traney.
Gas Tank
Starter

Thats all I can think of.

error402

Both Igniters - they are easy to take off too...they are small and only held in place by two screws each.

-Error

brison

The front brakes are a must. The braking system is designed to work as a whole. If you upgrade only the rear, the fronts will be too weak.

Gregs

i recently got an 85gsl-se for 170 bucks
ive already swapped the complete front suspension and brakes to my 81 automatic.... next is the rearend and suspension...
what else should i swap to my 81?
the motor has 135k on it and i was told it ran but the ignition is all stripped so i havent tried to start it..... if the motor runs i want to swap it to my 81 but until then any ideas?

Gregs

btw if the 13b goes into my 81 auto im gonna put the 5speed in too...

-greg

Pele

iTrader: (28)

Cut out and send me the rear wheel wells.

Please?

Gregs

ehhh i dont have the tools to do that

Sammymatik

I just remebered another one... The oil pressure regulator, isn't set at higher PSI than the others?

LongDuck

Throttle position sensor. I'd give you $40 for one right now!

Gregs

i would sell it to you but i think i may be putting the 13b in my 81 12a
email me and ill keep you posted on wether i do the swap or not...

-greg (mazdarx71981@hotmail.com)

Sammymatik

U are talking about a TPS from an SE? I've only got a spare TPS for and FC.

renns

LongDuck, I've got an '84 gsl-se tps if you still need it.

RacerX7fb

LongDuck I have a spare SE TPS, Im in San Diego ..not as far as Canada and could use 40 bucks

Dyre

Man, i need to take a torch with me to the junkyard and start scavaging wheel wells for people in the rust belt....

Gregs

if i can get the tools to do the wheel wells how much would you offer me for them?

-greg

LongDuck

RacerX7FB - drop me an e-mail, I may make a deal with you on that: longduck@mindspring.com

Thanks!

mwpayne

Oops, meant to start a new thread..