Good things to strip off a GSL-SE
What are good things to strip from a junkyard GSL-SE, I wanna be ready if I find anything good
1)fuel injectors 2)LSD rear end, complete 3)Driveshaft 4)bumper skins? I know I'm missing much.... help fill my shopping list |
If you get the rear end, get the front strut/brake assemblies as well to match.. on the interior, the electrical switches; power windows, etc.
|
The front strut/towers/hubs.
All the mag wheels. rear hubs w/axle. Every 12A powered RX-7 needs the better wheels/brakes. Oh...and the engine ;) Matt 1979 SA22C |
Everything.
Right on. |
Ok so the rear end is obvious... but the front brake assemlies are better on a GSL-SE? I thought they were the same?
Power windows and swithces is a good one. The mag wheels... what do these look like again...? I can't find the thread with all the wheel pics! :( And the engine u say? I know its a 13b... I don't know much about the SE's, but are these 6port? I know the rebuild prices are a bit higher on the SE''s. There has gotta be more than this? |
get the ashtray!!! SE's have HUGE ashtrays!!!!LOL
if the interior is grey get it!! |
The moonroofs are real swass, if you can find em.
Right on. |
Also make sure and get:
Fuel Pump Engine (if it is bad still get it for parts.) Turn signal wiper switches. (Under steering wheel) Windsheild wiper rack. Traney. Gas Tank Starter Thats all I can think of. |
Both Igniters - they are easy to take off too...they are small and only held in place by two screws each.
-Error |
The front brakes are a must. The braking system is designed to work as a whole. If you upgrade only the rear, the fronts will be too weak.
|
i recently got an 85gsl-se for 170 bucks
ive already swapped the complete front suspension and brakes to my 81 automatic.... next is the rearend and suspension... what else should i swap to my 81? the motor has 135k on it and i was told it ran but the ignition is all stripped so i havent tried to start it..... if the motor runs i want to swap it to my 81 but until then any ideas? |
btw if the 13b goes into my 81 auto im gonna put the 5speed in too...
-greg |
Cut out and send me the rear wheel wells. :)
Please? |
ehhh i dont have the tools to do that
|
I just remebered another one... The oil pressure regulator, isn't set at higher PSI than the others?
|
Throttle position sensor. I'd give you $40 for one right now!
|
i would sell it to you but i think i may be putting the 13b in my 81 12a
email me and ill keep you posted on wether i do the swap or not... -greg (mazdarx71981@hotmail.com) |
U are talking about a TPS from an SE? I've only got a spare TPS for and FC.
Originally posted by LongDuck Throttle position sensor. I'd give you $40 for one right now! |
LongDuck, I've got an '84 gsl-se tps if you still need it.
|
LongDuck I have a spare SE TPS, Im in San Diego ..not as far as Canada and could use 40 bucks :)
|
Man, i need to take a torch with me to the junkyard and start scavaging wheel wells for people in the rust belt....
|
if i can get the tools to do the wheel wells how much would you offer me for them?
-greg |
|
Oops, meant to start a new thread..
|
All times are GMT -5. The time now is 08:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands