gonna get flamed again oh yeah i'm gonna get flamed again
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: NY
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
gonna get flamed again oh yeah i'm gonna get flamed again
hey boys and girls I already know all your feeling on the ricer generation but I'm toying with custom wide body designs and have a new wing the wife picked up for my bday... will post pics as soon as the entire thing is done on the outside but here is a pic of the wing.
it actually fits the car well in terms of styling and design. the center is exactly the dimentions to follow the lines of the hatch...
again to each his or her own but no major flames and none of the **** like "how can he do this to a rex" and "when I meet him I'm gonna beat his ***"
btw when I get a chance I will post drawings of what the finished product will be... and give a description of the interior
it actually fits the car well in terms of styling and design. the center is exactly the dimentions to follow the lines of the hatch...
again to each his or her own but no major flames and none of the **** like "how can he do this to a rex" and "when I meet him I'm gonna beat his ***"
btw when I get a chance I will post drawings of what the finished product will be... and give a description of the interior
#2
The infamous number guy!
Join Date: Dec 2002
Location: Terre Haute, IN.
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
I don't really like the wing, but my god 1st gen owners here are so anti-rice it's not even funny... go to e-bay and look up the viper aluminum wing i think it suits the car much better... personally i'm going for the wrap around wing with the arch in the center.
#3
Senior Member
Thread Starter
Join Date: Mar 2003
Location: NY
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
you'd be surprised that curved center section mimics the rear window hatch perfectly... the only thing that sux is the fact that the base of the stantions are too long so therefore you get the overhang that requires the mod done on the fess up thread.
I plan on fabbing up some custom stantions that remedy that problem with mine. Thanks for the support ie not flaming and taking this with the grain of salt required...
btw - the car will be midnight metallic blue and this wing has a slight blue tinge to it
I plan on fabbing up some custom stantions that remedy that problem with mine. Thanks for the support ie not flaming and taking this with the grain of salt required...
btw - the car will be midnight metallic blue and this wing has a slight blue tinge to it
#5
Banned. I got OWNED!!!
Join Date: Nov 2002
Location: KING COUNTY, WA
Posts: 4,980
Likes: 0
Received 0 Likes
on
0 Posts
man that thing is "super high technology!" lol
rice in my opinion.... but i wont talk **** bout what u wanna do to your car..... its just kinda sad it turned out to be an fb and not a cibic...
-greg
rice in my opinion.... but i wont talk **** bout what u wanna do to your car..... its just kinda sad it turned out to be an fb and not a cibic...
-greg
#7
Senior Member
Join Date: Jan 2003
Location: Mosport Raceway,Bowmanville,Ont.
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
I have thoughts. I think I just may be a closet ricer cause I like your wing and yes it will follow the hatch PERFECTLY, I know this cause I checked by taking the same wing and removed the stands and laid it on the back of the car. Perfect in every way. Try making stands that are much shorter so the wing sits only a few inches above the body, then post pics.
Trending Topics
#9
What makes it rice if its functional and goes better on a wide body? Just dont plaster the car with Neuspeed and Mugen stickers and have whats under the hood as well to boot
#10
Senior Member
Join Date: Apr 2002
Location: Plano, TX
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by J Oliver
I have thoughts. I think I just may be a closet ricer cause I like your wing and yes it will follow the hatch PERFECTLY, I know this cause I checked by taking the same wing and removed the stands and laid it on the back of the car. Perfect in every way. Try making stands that are much shorter so the wing sits only a few inches above the body, then post pics.
I have thoughts. I think I just may be a closet ricer cause I like your wing and yes it will follow the hatch PERFECTLY, I know this cause I checked by taking the same wing and removed the stands and laid it on the back of the car. Perfect in every way. Try making stands that are much shorter so the wing sits only a few inches above the body, then post pics.
LOL, I was going to say something about coming out of the closet! I have always liked the rear wings, just never have found one that works on the 1st gen. and was always afraid of others opinions.
Those wings never used to be "rice". The wings began over in Europe in the touring car series.......we just adopted them over here on the "rice" cars and unfortunatly has become a "rice" ad on
#14
Senior Member
Thread Starter
Join Date: Mar 2003
Location: NY
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
its about time you guys started realizing its about the person and the car... thanks all, I thought it was an awsome b-day present and my wife is psyched...
Like I said before the exterior will be midnight metallic blue with a possible carbon fiber hood to match the wing. the hood of course will be one off as there are no cf hoods available for the first gen. besides it now has to have the blue tinge as well.
The front end will look something like this:
The rear will most likely be the mariah mode 1 rear quarters. Tail lights will stay stock as I am partial to them. Molding of course will be shaved as will the factory antenna. Antenna to be replaced with the SAAB 2" antenna center mounted infront of the rear window squirts.
The interior will get the italian treatment. I have a Nardi Tourino (sp) steering wheel with other fine wood additions as well as brushed stainless accents. Seats are up in the air right now. Shift **** will be the special rotor engraved, have to stick some special rotary parts in the car.
Battery to be relocated someplace in the back not sure maybe behind the passenger seat... if so then two eight inch sube will reside in the center back and an amp behind the driver. Have to be carful not to add too much weight so some of the audio equip may change.
Engine treatment will include second gen intake (hopefully the later n/a intake) until I can perfect a turbo system. The turbo I have in mind is the T04e... ball bearing if I can find one and both water and oil cooled. Street ported 13b gslse converted to 4 port with repu rotors to allow the boost to be cranked.
Exhaust will include custom fabbed turbo header and free flowing cat back to some 3" setup wanna go dual rear exit but have not figured out how I will accomplish this.
Opinions wanted...
btw almost forgot starting out with an 85 SE...
Like I said before the exterior will be midnight metallic blue with a possible carbon fiber hood to match the wing. the hood of course will be one off as there are no cf hoods available for the first gen. besides it now has to have the blue tinge as well.
The front end will look something like this:
The rear will most likely be the mariah mode 1 rear quarters. Tail lights will stay stock as I am partial to them. Molding of course will be shaved as will the factory antenna. Antenna to be replaced with the SAAB 2" antenna center mounted infront of the rear window squirts.
The interior will get the italian treatment. I have a Nardi Tourino (sp) steering wheel with other fine wood additions as well as brushed stainless accents. Seats are up in the air right now. Shift **** will be the special rotor engraved, have to stick some special rotary parts in the car.
Battery to be relocated someplace in the back not sure maybe behind the passenger seat... if so then two eight inch sube will reside in the center back and an amp behind the driver. Have to be carful not to add too much weight so some of the audio equip may change.
Engine treatment will include second gen intake (hopefully the later n/a intake) until I can perfect a turbo system. The turbo I have in mind is the T04e... ball bearing if I can find one and both water and oil cooled. Street ported 13b gslse converted to 4 port with repu rotors to allow the boost to be cranked.
Exhaust will include custom fabbed turbo header and free flowing cat back to some 3" setup wanna go dual rear exit but have not figured out how I will accomplish this.
Opinions wanted...
btw almost forgot starting out with an 85 SE...
Last edited by toxic_d; 05-23-03 at 09:56 AM.
#16
Senior Member
Thread Starter
Join Date: Mar 2003
Location: NY
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Kypreo thanks for the info...
Here are a few more pics
Steering wheel:
And shift ****:
http://ebay3.ipixmedia.com/abc/M28/_...105b5b/i-1.JPG
Here are a few more pics
Steering wheel:
And shift ****:
http://ebay3.ipixmedia.com/abc/M28/_...105b5b/i-1.JPG
#19
Mr May 2011
iTrader: (8)
Originally posted by 1st7heaven
LOL, I was going to say something about coming out of the closet! I have always liked the rear wings, just never have found one that works on the 1st gen. and was always afraid of others opinions.
LOL, I was going to say something about coming out of the closet! I have always liked the rear wings, just never have found one that works on the 1st gen. and was always afraid of others opinions.
#20
Mr May 2011
iTrader: (8)
Originally posted by toxic_d
its about time you guys started realizing its about the person and the car... thanks all, I thought it was an awsome b-day present and my wife is psyched...
Like I said before the exterior will be midnight metallic blue with a possible carbon fiber hood to match the wing. the hood of course will be one off as there are no cf hoods available for the first gen. besides it now has to have the blue tinge as well.
The front end will look something like this... The rear will most likely be the mariah mode 1 rear quarters. Tail lights will stay stock as I am partial to them. Molding of course will be shaved as will the factory antenna.
its about time you guys started realizing its about the person and the car... thanks all, I thought it was an awsome b-day present and my wife is psyched...
Like I said before the exterior will be midnight metallic blue with a possible carbon fiber hood to match the wing. the hood of course will be one off as there are no cf hoods available for the first gen. besides it now has to have the blue tinge as well.
The front end will look something like this... The rear will most likely be the mariah mode 1 rear quarters. Tail lights will stay stock as I am partial to them. Molding of course will be shaved as will the factory antenna.
#25
Rotary Freak
Originally posted by O 16581 72452 5
I don't really like the wing, but my god 1st gen owners here are so anti-rice it's not even funny... go to e-bay and look up the viper aluminum wing i think it suits the car much better... personally i'm going for the wrap around wing with the arch in the center.
I don't really like the wing, but my god 1st gen owners here are so anti-rice it's not even funny... go to e-bay and look up the viper aluminum wing i think it suits the car much better... personally i'm going for the wrap around wing with the arch in the center.
IMO these cars are japan sports car, just like american sports cars, but made in another country.
theres only a few cars that rolled out of the japanese market that I give respect to and they are,
Mazda RX7
Toyota supra
Nissan 300zx
Acura NSX
those are the real contenders, the top of the line import sports cars, looking at the class, style, and price of the compairison cars I think its very easy to see how a honda civic does NOT fit in this class.
Therefore most people would not in any way like there cars to be referred to in any way with the civic or other alike cars.
I'm just rambling, makes sense to me