crackedoutducky

I cannot get my gauges out ? the haynes manual says that there is a small white clip i push on, and then pull the mechanism...but i try that, and the wires do not come out ? anyone help ? lol

Max7

there are 2 white clips, 2 big round ones and the speedo cable, release the speedo cable clip in the engine bay, that will give you more room to pull the cluster out. its a pain, did it 2 days ago.

crackedoutducky

where is the speedo cable located inside the engine bay ? (thanks for the quick reply)

Max7

Just follow the cable up from the tranny, its hooks to the backside of the steering box I belive.

Max7

I reached up from under the dash to remove the speedo cable, the rest can be done by turning the cluster semi-sideways in the dash, there is a white clip connector on each side and the 2 big rounds ones centered behind the tach and speedo, there are little clips you press down on to release it, tug it a bit, they can fit tight.