Furl gauge witing help
Furl gauge witing help
I have an aftermarket fuel gauge in my sa22c. Unfortunately my original connector to the fuel sender was in the box that was stolen last year so I can't figure out the wiring. Can someone point me onto witch term al on the sender goes to the gauge and where does the other go?
Thank you
Thank you
Senior Member
iTrader: (1)
Joined: Aug 2010
Posts: 340
Likes: 0
From: Southern Minnesota and Southern California
Just looking at the FSM writing diagram it looks like the yellow write comes off the gauge connects up on the let side of the dash with the rear harness. It continues to the sender as a yellow wire. The connector at the sender has the yellow and black wire. The black wire is just your ground. Hopefully that helped. Good luck. If you haven't got the FSM you can download it at Foxed.ca - Mazda RX-7 Manuals. The fuel gauge and sender are on page 16 and 17 of the wiring diagram.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
kryan9
1st Generation Specific (1979-1985)
2
Sep 15, 2015 10:11 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM



