Front oil pressure regulator
#5
If you put a shim between the oil regulator and the housing,you also have to modify the back one by putting it on a 2 ton press and pressing it down.Factory pressure is 60. After modifying you should get at least 80.
#7
djessence
using a vice semi works as well, as does using a third gen regulator.
Trending Topics
#8
I touch my Wankel.
iTrader: (1)
Join Date: Aug 2007
Location: Muskegon, MI
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
What is this business of a press? I put 3 washers in the rear regulator when I rebuilt my S5 N/A. To put it back together I just pushed the piston down with a screwdriver before I pushed the new roll pin in.