Found wheels for 1st gen
Originally Posted by todd54321
Very nice wheels dude....That is exactly the kind of thing I am looking for to put on my 1st gen. What size of tire?
tires are going to be bfgoodrich g-force KD
in a 205/50/15 size
Eats, Sleeps, Dreams Rotary
Joined: Jul 2004
Posts: 3,247
Likes: 2
From: Allentown, PA - Paterson, NJ
Originally Posted by RotaDrift
the wheels on the red first gen aren't that rare. they're just old Z wheels
Originally Posted by MattG
God as made some good decisions, But what I cant figure out whos call it was on that pink FB in your Avatar Carl lol
I guess that's what God was telling my friend when he did it in Adobe Photoshop 
My car is silver, K3 I believe.
Originally Posted by camocarl
I guess that's what God was telling my friend when he did it in Adobe Photoshop My car is silver, K3 I believe.LoL You got to love it though!
"i have a set ROH SNYPERS 15x7 4x110mm lugs, hardware brand new in the box as the gentelman said earlier very rare, $850.00."
You could by a pretty good running 7 for $850.00. My stock wheels are looking better all the time!
Ray
You could by a pretty good running 7 for $850.00. My stock wheels are looking better all the time!
Ray
Last edited by ray green; Jul 31, 2006 at 03:26 PM.
[/IMG]
[/IMG]
ok, it was asked earlier in this thread, but i never saw an answer..
What is the proper backspacing?
i'm considering a set of motegi FF7 rims, but i'm not sure what the backspacing should be.
FF7:
Rim Diameter (in): 16 in.
Rim Width (in): 7.00 in.
Backspacing (in): 5.625 in.
Offset (mm): +42.00mm
What is the proper backspacing?
i'm considering a set of motegi FF7 rims, but i'm not sure what the backspacing should be.
FF7:
Rim Diameter (in): 16 in.
Rim Width (in): 7.00 in.
Backspacing (in): 5.625 in.
Offset (mm): +42.00mm
Too old to act my age
Joined: Feb 2005
Posts: 3,164
Likes: 0
From: Tulsa, Ok.
The 4x110 wheels need somewhere in the +10 - +20mm offset for a 7" width. Any less offset, and fender clearance becomes a problem. Any higher offset, and spring/strut clearance is the issue.
My Ronal 15x7 wheels are a +15 offset, and there are no clearance issues. I think the Kosei K1 15x7 has a +17 offset.
My Ronal 15x7 wheels are a +15 offset, and there are no clearance issues. I think the Kosei K1 15x7 has a +17 offset.
My wife bought me 2 RX-7s
Joined: Aug 2001
Posts: 2,328
Likes: 3
From: Saskatoon, Saskatchewan, Canada
Tire selection is getting problematic, but until I'm unable to get R tires in 13 inch sizes, I'm not switching up. Also, I just sunk a bit of change into a set of 13x7 Revolution 4 spoke rims, which look quite pimp, or will when they finally get here this week.
As for the 'cup' bolts, they make me a little nervous but I suppose if the cup is fairly beefy and the wheel centers well, it should work.
As for the 'cup' bolts, they make me a little nervous but I suppose if the cup is fairly beefy and the wheel centers well, it should work.
Senior Member
Joined: Jul 2004
Posts: 444
Likes: 0
From: Delhi, CA
tires
Originally Posted by Rogue_Wulff
The 4x110 wheels need somewhere in the +10 - +20mm offset for a 7" width. Any less offset, and fender clearance becomes a problem. Any higher offset, and spring/strut clearance is the issue.
My Ronal 15x7 wheels are a +15 offset, and there are no clearance issues. I think the Kosei K1 15x7 has a +17 offset.
My Ronal 15x7 wheels are a +15 offset, and there are no clearance issues. I think the Kosei K1 15x7 has a +17 offset.
OLDROTA
Joined: Apr 2003
Posts: 1,389
Likes: 2
From: Los Angeles
The Watanabe RS-8's on my Rx2 are for a 4x110 1st Gen. They are +9 in front (6.5") and +15 rear (7.0") This gives the staggerd widths an even 2" lip.
That's why I asked about the offsets of those wheels before...most are probably in the +24 thru +40 offsets, which will definately not fit.
That's why I asked about the offsets of those wheels before...most are probably in the +24 thru +40 offsets, which will definately not fit.
kosei K1's have +17 offset and fit perfect (don't stick out at all), I will take some pics of mine when I get home and post them for all to see, prolly going to be huge resolution as idk how to resize them.
Originally Posted by Jaime Enriquez
The Watanabe RS-8's on my Rx2 are for a 4x110 1st Gen. They are +9 in front (6.5") and +15 rear (7.0") This gives the staggerd widths an even 2" lip.
That's why I asked about the offsets of those wheels before...most are probably in the +24 thru +40 offsets, which will definately not fit.
That's why I asked about the offsets of those wheels before...most are probably in the +24 thru +40 offsets, which will definately not fit.
