a/f meter O2 narrowband sensor location
#1
Senior Member
Thread Starter
a/f meter O2 narrowband sensor location
i had a A/F meter lying around and want to hock it up in the 7 i need to put a bung in the exhaust but not sure of the best location
the Lambda sensor is just a 4 wire universal one with heater
Black = Signal [0.1 - 1.0 Volts]
Grey = Earth [0.1 Volts Max]
White = Heater [12 Volts]
White [ Heater 12 Volts]
the meter only takes 1 wire persume Black, so my question is
A) where is best to mount the sensor in the exhaust
B) do both white wires just hook up to 12v+ all the time the ign is on?
i know wideband is better but for now this is the set up maybe wideband in the future
thanks
Mark
the Lambda sensor is just a 4 wire universal one with heater
Black = Signal [0.1 - 1.0 Volts]
Grey = Earth [0.1 Volts Max]
White = Heater [12 Volts]
White [ Heater 12 Volts]
the meter only takes 1 wire persume Black, so my question is
A) where is best to mount the sensor in the exhaust
B) do both white wires just hook up to 12v+ all the time the ign is on?
i know wideband is better but for now this is the set up maybe wideband in the future
thanks
Mark
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM