How do you remove the drive shaft on my 1985 12a manual? I got the bolts out now the thing well not come off Help?!?!?!?!

 

Hammer

 

tried it well not move

 

While I don't have an sa/fb I'm going to assume it's set up like most other rwd cars. Take a putty knife, craper, or something similar to the driveshaft to diff. flange. Set it at the seem and hammer it into it. Might want to lube it with some liquid wrench or similar first if you have it.

 

oooohhhh......

MN. Sorry...

Try a smaller cold chisel at the flange. Let the liquid wrench set in a while longer.

 

Bigger hammer!

 

I sorry to say a bigger hammer worked lol Now I got question how to I clean the bel houseing. What something that well make it easyer

 

Brake cleaner and a rag works good to clean the inside of the bellhousing to remove grease/oil. If you want to clean the outside, a wire wheel works well.

 

is here a gasket from the transmission to the engine?

 

nope, no gasket between the engine and transmission.