Distributor
#1
Newbie
Thread Starter
Join Date: May 2003
Location: Alamed, Ca
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Distributor
I have a 79' with a 12a and weber carb. I was wondering what the best electronic distributor there is for this setup and where do I get it??
Thanks for any help,
Dave
Thanks for any help,
Dave
#3
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
Any 81-85 distributor from a 12A powered RX-7 will do the job. Make sure the ignitors are tested good and buy a couple of spares incase you get a burnout. The wireing job is very simple. The tutorial at http://www.mazspeed.com/ignitionswap.htm has very good directions.
The swap took myself and my friend about an hour and a half. You probably won't notice too much of a difference, but you'll never have to adjust the dwell again.
Good luck and welcome to the community
The swap took myself and my friend about an hour and a half. You probably won't notice too much of a difference, but you'll never have to adjust the dwell again.
Good luck and welcome to the community
Thread
Thread Starter
Forum
Replies
Last Post