dellorto jet kit?
11-21-05, 12:21 AM
#1
wheres the water goin?
Thread Starter
iTrader: (9)
Join Date: May 2005
Location: Nor Cal
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
dellorto jet kit?
does annyone knkow where i can get a dellorto jet kit forom and some other parts from. anyone help would be greatly thianked
charles
charles
11-21-05, 08:47 AM
#2
Waffles - hmmm good
iTrader: (1)
The most reliable place to get Dellorto parts is here. They are in the UK so its cost a bit more and takes a week or so to get the kits but they are the best source for the parts.
Theres a place in CA in the US as well here, but I had real problems getting my kit ordered from them. They are unresponive and slow. I ended up canceling the order and making it from the place in the UK.
BTW, if it was a RB prepared Dellorto the rebuild kits will not include the thick spacer for the accellerator pump gasket and the needle seat won't be a 300. Mine was a 350 so I could still use it even though its a bit larger. Some folks have ended up with 250's and had to drill them out.
Theres a place in CA in the US as well here, but I had real problems getting my kit ordered from them. They are unresponive and slow. I ended up canceling the order and making it from the place in the UK.
BTW, if it was a RB prepared Dellorto the rebuild kits will not include the thick spacer for the accellerator pump gasket and the needle seat won't be a 300. Mine was a 350 so I could still use it even though its a bit larger. Some folks have ended up with 250's and had to drill them out.
11-21-05, 09:31 AM
#3
wheres the water goin?
Thread Starter
iTrader: (9)
Join Date: May 2005
Location: Nor Cal
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by t_g_farrell
The most reliable place to get Dellorto parts is here. They are in the UK so its cost a bit more and takes a week or so to get the kits but they are the best source for the parts.
Theres a place in CA in the US as well here, but I had real problems getting my kit ordered from them. They are unresponive and slow. I ended up canceling the order and making it from the place in the UK.
BTW, if it was a RB prepared Dellorto the rebuild kits will not include the thick spacer for the accellerator pump gasket and the needle seat won't be a 300. Mine was a 350 so I could still use it even though its a bit larger. Some folks have ended up with 250's and had to drill them out.
Theres a place in CA in the US as well here, but I had real problems getting my kit ordered from them. They are unresponive and slow. I ended up canceling the order and making it from the place in the UK.
BTW, if it was a RB prepared Dellorto the rebuild kits will not include the thick spacer for the accellerator pump gasket and the needle seat won't be a 300. Mine was a 350 so I could still use it even though its a bit larger. Some folks have ended up with 250's and had to drill them out.
cool thanks i think that i am going to go with the company in UK but my only problem is that i dont know what to get. i want to rebuild it and change out some linkage and i dont know what i have as far as jets right now. as far as if its RB preped i have no clue is there a way to tell. and is there a diagram so i can go off of that so i can what i need the 1st time.
i also plan on doing some porting to the engine when i rip it apart what size would i need for that
thank you
charles
11-21-05, 11:33 AM
#4
Waffles - hmmm good
iTrader: (1)
If it has the nipples on the top of each venturi for the OMP tubes to attach to it thats one sign that its a RB prepped Dell. The other is if the accel pump gasket is thick ( like 1/8" ) and black. Lets see, they drilled extra holes in the emulsion tubes too.
For more info goto here. It talks about jetting for various applications. Also just search this forum for dellorto, you'll see lots of discussions.
For more info goto here. It talks about jetting for various applications. Also just search this forum for dellorto, you'll see lots of discussions.
11-21-05, 02:51 PM
#5
wheres the water goin?
Thread Starter
iTrader: (9)
Join Date: May 2005
Location: Nor Cal
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by t_g_farrell
If it has the nipples on the top of each venturi for the OMP tubes to attach to it thats one sign that its a RB prepped Dell. The other is if the accel pump gasket is thick ( like 1/8" ) and black. Lets see, they drilled extra holes in the emulsion tubes too.
For more info goto here. It talks about jetting for various applications. Also just search this forum for dellorto, you'll see lots of discussions.
For more info goto here. It talks about jetting for various applications. Also just search this forum for dellorto, you'll see lots of discussions.
cool it does have the nipples on it so im in business. i ll check out the website and i ll too on here if i cant find what im looking for i ll just post here again
thanks agin
charles
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM
