crush washers?
#1
Lives on the Forum
Thread Starter
crush washers?
Anybody know where to get the aluminum crush washers for the Nikki carb? This is for the metal fuel lines that attach to the carb. My carb kit did not include them, and the old ones are leaking pretty bad...
Any info appreciated...
The first place I checked with was the dealership, and they said that they do not list them....all the parts stores I contacted told me to call the dealership! Go figure!
Any info appreciated...
The first place I checked with was the dealership, and they said that they do not list them....all the parts stores I contacted told me to call the dealership! Go figure!
Last edited by Kentetsu; 04-26-05 at 12:31 PM. Reason: Forgot some info
#4
GET OFF MY LAWN
iTrader: (1)
Yea, check local auto parts stores, don't say exactly what its for just show them one. The inside diameter is the most important on a banjo fitting, they should have a box behind the counter with an assortmant. Take your bolt with you too, to size them if they look close.
#5
Lives on the Forum
Thread Starter
Okay then, to Napa/Pepboys I go......
Thanks a bunch guys, don't want to have my engine go up in flames just because of a leaking washer!
Thanks a bunch guys, don't want to have my engine go up in flames just because of a leaking washer!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM