clutch
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
clutch
my clutch is slippin on my 85 7 can someone tell me what stuff i should get off here.. i want a race clutch but i dont know what pressure plate to get.. helpp
http://www.mazdatrix.com/f86-92nt.htm
http://www.mazdatrix.com/f86-92nt.htm
#2
Lapping = Fapping
iTrader: (13)
Get the street strip pressure plate. Anything stronger will go through masters and slaves at an alarming rate. That's what I heard anyway. I went with a street strip pressure plate and had to rebuild the master and slave. Once so far.
The pedal effort is also something to consider. I don't want it to be any stiffer than street strip. That's my personal preference.
The pedal effort is also something to consider. I don't want it to be any stiffer than street strip. That's my personal preference.
#4
Old Fart Young at Heart
iTrader: (6)
Unless you're drag racing, the street/strip disc works well. If you're doing frequent drag launches and daily driving, try the 6 puck disc with springs. If you don't mind the extra pedal effort, race pressure plate and new, not rebuilt, clutch master, slave and hose.
#7
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
http://mrcmfg.com/catalog/index.php?cPath=108_112_38 the first one at the top of this page
Trending Topics
#8
Lives on the Forum
If it wouldn't be ok, then Billy wouldn't sell it to you. Plain as that. There is a reason that so many of us have come to trust his advice and wisdom.
.
.
Thread
Thread Starter
Forum
Replies
Last Post