1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

clunky shifting

Thread Tools
 
Search this Thread
 
Old Mar 19, 2004 | 11:42 PM
  #1  
voodoosporko's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 11
Likes: 0
From: Norman, Oklahoma
clunky shifting

Hey, Im driving an 85 GSL. The car shifts smoothly sometimes..but alot of times it is very clunky feeling. Recently, when I engage or disengage the clutch, i can here a small thunk. I also changed out the tranny oil the other day with some redline, when I pulled the bottom plug off, it had a bunch of stuff that looked like metal scrappings on the top...Am I looking at rebuilding the tranny? new clutch? both?

Thanks in advance
Reply
Old Mar 21, 2004 | 04:48 PM
  #2  
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 332
Likes: 0
From: TN
I don't know the price in rebuilding a tranny, but I say it would be kind of high. If you have a limited budget I would check around for a used one. You might be able to get a good tranny for around $200.

If your tranny feels smooth I would not worry about it too much. How much metal scrapings were on the plug? When I change my fluid it will have a light coating of fillings. The bottom plug has a built in magnet that is made to trap metal and keep it from circulating through the tranny.
Reply
Old Mar 21, 2004 | 06:55 PM
  #3  
dirty86's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 510
Likes: 0
From: .
i had a hell of a time shifting my car
it felt like bad syncros
turns out it was the piolet bearing
changed it and now smoooooooth as silk
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
Oct 7, 2015 08:17 AM
Rotafuzz
New Member RX-7 Technical
3
Sep 30, 2015 09:55 AM




All times are GMT -5. The time now is 08:54 PM.