1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

clacking / knocking noise

Thread Tools
 
Search this Thread
 
Old 04-21-15, 05:22 AM
  #1  
Junior Member
Thread Starter
 
___Rellik___'s Avatar
 
Join Date: Apr 2015
Location: new york
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
clacking / knocking noise

Ok i get the car running fine and all of a sudden at 2500 rpm it makes a constant claking noise towards the back of the motor i cant figure out what the sound is i researched and no answers please help
Old 04-21-15, 09:11 AM
  #2  
Junior Member
Thread Starter
 
___Rellik___'s Avatar
 
Join Date: Apr 2015
Location: new york
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
i drained the oil in the car too see if i had any metal in it thinking its a spun stationary gear but to my surprise no metal not a flake, however gas was in the oil almost to a water point i changed the oil not even a week ago drove the car approximately 50 mi
Old 04-21-15, 11:00 AM
  #3  
Junior Member
Thread Starter
 
___Rellik___'s Avatar
 
Join Date: Apr 2015
Location: new york
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
i just put all new oil into the car and the noise continues, i am thinking it may have to do with the flywheel not being torqued down properly or a loose bolt, the noise is coming form between the motor and bell-housing at 2500 rpm you here "clack clack clack...." it dose not sound like its a diesel, it sounds like a valve tap on a Honda but a little louder,
Old 04-21-15, 11:13 AM
  #4  
Junior Member
Thread Starter
 
___Rellik___'s Avatar
 
Join Date: Apr 2015
Location: new york
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
<iframe width="420" height="315" src="https://www.youtube.com/embed/Ozt4tN6wfk0" frameborder="0" allowfullscreen></iframe>

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 10:04 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM



Quick Reply: clacking / knocking noise



All times are GMT -5. The time now is 11:37 AM.