Choke wont stay out
02-12-03, 01:12 PM
#1
Choke wont stay out
Eversince i removed my emmision controls (via, Carl, and Pratches illiustrated guide. Thanks guys. 
) my choke always wants to pull back in. This sucks in the moring and in the winter when it takes my car 10 minutes to warm up. I was looking at it last night and i figured i could just take the return spring out of its box, but i thought it would be better to ask questions before i start ripping things open. Anyone have a suggestion as to what might of caused this? Ide like to fix it so the cable is loose and i can push it in when i want to.
Shawn
) my choke always wants to pull back in. This sucks in the moring and in the winter when it takes my car 10 minutes to warm up. I was looking at it last night and i figured i could just take the return spring out of its box, but i thought it would be better to ask questions before i start ripping things open. Anyone have a suggestion as to what might of caused this? Ide like to fix it so the cable is loose and i can push it in when i want to. Shawn
02-12-03, 02:57 PM
#2
Airflow is my life
On the back of the waterpump housing is a switch. Thats the water temp choke switch. It has 2 wires about 5 inches long terminating in a rectangular plug. Maybe you unplugged it accidentally? Or broke a wire off it.
To test it, disconnect the connector and jump the 2 harness wires to each other. The choke should now stay out no matter what the engine temp is.
To test it, disconnect the connector and jump the 2 harness wires to each other. The choke should now stay out no matter what the engine temp is.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM