Check Connector B-25
Thread Starter
Full Member
Joined: Dec 2003
Posts: 142
Likes: 1
From: Austria
Check Connector B-25
Hi!
Just went through the wiring diagram for the Sa-1984 with 12A Engine. There is a Check Connector in the Emission Control System near the alternator. Does anybody know what it is for?
Harry
Just went through the wiring diagram for the Sa-1984 with 12A Engine. There is a Check Connector in the Emission Control System near the alternator. Does anybody know what it is for?
Harry
Racingbeat dealer
Joined: Dec 2002
Posts: 787
Likes: 1
From: Uden (AFB Volkel), The Netherlands
I'm not sure (yet) but If I recall it right, is a connector to check (when you short the 2 connectorwires) if idle stays correct when the aico is switched on and is working to keep idle rev the same as when airco is switched off
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
By The Way:
SA-1984 makes no sense
SA = 1979-1980
FB = 1981-1985
-SE (as in GSL-SE) denotes a 13b with fuel injection '84 or '85.
Checked my Heynes - and I don't have a clue what it does, sorry.
Jon
SA-1984 makes no sense
SA = 1979-1980
FB = 1981-1985
-SE (as in GSL-SE) denotes a 13b with fuel injection '84 or '85.
Checked my Heynes - and I don't have a clue what it does, sorry.
Jon
Racingbeat dealer
Joined: Dec 2002
Posts: 787
Likes: 1
From: Uden (AFB Volkel), The Netherlands
Originally posted by Junia
all first gens were are SA22C in most other parts of the world. I think FB was only used in US and Canada
all first gens were are SA22C in most other parts of the world. I think FB was only used in US and Canada
SA = 1979-1981
FB =1981-1985
BTW... I've looked, seems indeed for checking idle when airco is powered on
Trending Topics
Racingbeat dealer
Joined: Dec 2002
Posts: 787
Likes: 1
From: Uden (AFB Volkel), The Netherlands
welll ehhh.... what about the rest of the world?
designation is taken from VIN number mostly. Sometimes also in Series of Mark
Series 1-3 is first gen (FB= serie 2-3, SA Series 1)
Mark 1-3 is first gen (FB= mark 2-3, SA Mark 1)
But most of the times people are refering to the cars as SA and FB
(SA with steel bumpers and FB with the rubber ones)
designation is taken from VIN number mostly. Sometimes also in Series of Mark
Series 1-3 is first gen (FB= serie 2-3, SA Series 1)
Mark 1-3 is first gen (FB= mark 2-3, SA Mark 1)
But most of the times people are refering to the cars as SA and FB
(SA with steel bumpers and FB with the rubber ones)
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM