carb inlet no flow?
#1
Full Member
Thread Starter
Join Date: Apr 2014
Location: Montreal
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
carb inlet no flow?
Hey guys I have just reconnected my fuel lines and stuff after doing a gas tank repair. The issue is that gas won't flow into the carb from the inlet. The fuel line pumps out gas like crazy if you disconnect it so that's not an issue, however when it is connected to the carb it doesn't flow. The car will also start if I pour gas into the carb. Its the stock nikki carb and the only recent change is that I removed the air pump during an install of the racingbeat header. I made sure to use the block off plates the exhaust came with and everything! The car is a 1985 RX7 GSL.
Thanks for the help guys!
Thanks for the help guys!
#3
Full Member
Thread Starter
Join Date: Apr 2014
Location: Montreal
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
the hoses are on correctly... I had it running with this configuration 1 month ago which makes me think that a blockage has occurred somehow? but I am running 2 fuel filters so that seems unlikely. Ill post a pic of it in a sec
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM