Break Lights and dash lights
Thread Starter
Can Post Only in New Member Section
Joined: Dec 2017
Posts: 1
Likes: 0
From: Florida
Break Lights and dash lights
86 Mazda RX-7 1.3 non turbo
Problem is that break ligths dont work when a press the pedal the only thing that works is the head lioghts ,flashing lights and turn signals. Check all fuses are ok . need some help. thanks
Problem is that break ligths dont work when a press the pedal the only thing that works is the head lioghts ,flashing lights and turn signals. Check all fuses are ok . need some help. thanks
hey bRotard
Joined: May 2016
Posts: 95
Likes: 4
From: East Coast
Checked the wires? Buggy lil creatures might have gotten to them somewhere along the way. I'm going to assume you've made sure the bulbs weren't burnt lol. That's all I can really think of if the fuses are fine.
hey bRotard
Joined: May 2016
Posts: 95
Likes: 4
From: East Coast
Sorry to double post, I'm not seeing an edit feature on GarageTalk, but regarding your dash lights - connections could be poor, or again a burnt out bulb, I've got one side lit up and one side dead - gauges and lights behind em work, just the "overhead" dash light on the left is out. Probably time to just refurbish the cluster to be honest (#20386 to-do on my list 
)
)
I had this issue in my FC when I first got it. What Fixed the issue for me was pulling out the switch for the lights and tining(pouring solder onto) one of the pins on the back of the switch. The pin was black and corroded and tinning takes away the corrosion leaving a nice clean surface. Been working for 3 years now since the fix.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic New engine, break in base map help needed
twin7r1
Adaptronic Engine Mgmt - AUS
2
Oct 20, 2016 05:09 AM
04Green
2nd Generation Specific (1986-1992)
0
Sep 23, 2016 07:14 PM