autonomics turbo progress big pic
#1
OHhh yea
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Merica
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
autonomics turbo progress big pic
well everyone I am over 3/4 of the way through my turbo/fuel injection project
exhaust manifold and down pipe were custom made
megasquirt is all wired up as well
will be ready to start the car by sunday!
I'll post more pics once i get it all together
exhaust manifold and down pipe were custom made
megasquirt is all wired up as well
will be ready to start the car by sunday!
I'll post more pics once i get it all together
Trending Topics
#11
Senior Member
Join Date: Dec 2005
Location: New Hampshire
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
nice project, those fuel lines though dont look very good as fars as location. why didn't buy the plenum from them ? they do sell them for the same tb. any how keep up the good work
#14
OHhh yea
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Merica
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
the throttle body is actually was used on a winnebago with the same injectors
the gas lines were not set up in that picture
throttle body is welded inside and out and will be coated with an epoxy resein (its early)
exhaust manifold idea was by pictures from rx3mist.com
the guy said he stopped making them and it would take 3 months to get it
I simply took my old pacesetter header and one mandrel u bend and made my own manifold
alot cheaper than paying someone 300 bucks to do a half *** job
here is my pic of my tacked up downpipe
full write-up and more pictures on the way
the gas lines were not set up in that picture
throttle body is welded inside and out and will be coated with an epoxy resein (its early)
exhaust manifold idea was by pictures from rx3mist.com
the guy said he stopped making them and it would take 3 months to get it
I simply took my old pacesetter header and one mandrel u bend and made my own manifold
alot cheaper than paying someone 300 bucks to do a half *** job
here is my pic of my tacked up downpipe
full write-up and more pictures on the way
#16
Senior Member
Join Date: Oct 2002
Location: Chesapeake, Va
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
I like the looks of your setup. I'd love to go fuel injection on my turbo 12a, but alas, I dont have that kind of money. Let us know how much things have cost you.
#20
OHhh yea
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Merica
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
well its all asembled but the megasquirt which needs the flyback board and wiring for msd ignition
the flyback board is the only thing holding me back will post again once the thing is running
the flyback board is the only thing holding me back will post again once the thing is running
#22
Rotary Enthusiast
Originally Posted by SPERRYsan
well its all asembled but the megasquirt which needs the flyback board and wiring for msd ignition
the flyback board is the only thing holding me back will post again once the thing is running
the flyback board is the only thing holding me back will post again once the thing is running
#25
OHhh yea
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Merica
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
[IMG][/IMG]
my plan was to make a heat sheild for it if it began to pose a problem
engine bay assembled
megasquirt communicates with car
map
iat
tps
o2 gauges all work it megatune
watchout for those flyback boards boys!!
should be running quite soon
my plan was to make a heat sheild for it if it began to pose a problem
engine bay assembled
megasquirt communicates with car
map
iat
tps
o2 gauges all work it megatune
watchout for those flyback boards boys!!
should be running quite soon