1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Automatic to Manual Conversion

Thread Tools
 
Search this Thread
 
Old Dec 24, 2012 | 10:50 AM
  #1  
MR.45's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 302
Likes: 3
From: Orlando
Automatic to Manual Conversion

I am going to be converting an 85 rx7 to manual for my girlfriend here shortly. Was trying to find a write up on the conversion if there is one at all. Does anyone know of a decent write up on the whole conversion process? Thank you
Reply
Old Dec 24, 2012 | 03:08 PM
  #2  
74RX4's Avatar
Round and Round
Tenured Member 15 Years
iTrader: (10)
 
Joined: Aug 2002
Posts: 1,516
Likes: 3
From: SW Florida
https://www.rx7club.com/1st-gen-arch...ersion-276159/
Reply
Old Dec 24, 2012 | 08:11 PM
  #3  
MR.45's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 302
Likes: 3
From: Orlando
thanks for the info! much appreciated
Reply
Old Dec 25, 2012 | 12:11 AM
  #4  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
i've personally performed the swap with outstanding success. i made a thread documenting the process that you may find helpful to you. its filled with plenty of pics!

https://www.rx7club.com/1st-generati...-begun-783169/
Reply
Old Dec 25, 2012 | 08:59 AM
  #5  
Glazedham42's Avatar
Resurrecting Gus
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2003
Posts: 2,790
Likes: 6
From: Indiana
I did this swap on an 85 GS back in the day. The hardest part is getting the pedal box out and switched over, only because ere is very little room under the dash for such a big cumbersome object to be maneuvered out. Make sure you grab the wiring harness for the transmission off of the donor car. It is easy to forget. Also make sure you grab the clutch hard line that bolts on the firewall.

One other thing you need to watch out for is that the pedal boxes on 81-83 cars is ever so slightly different than the 84-84 cars. I found this out the hard way. You can,t swap it straight over as a unit. the bolt holes wont line up when you try to tighten it down. However, if you have an 81-83 donor car you can take off the individual pedals and swap them over to your 85 auto bracket. Then reinstall the 85 auto pedal box with the 83 manual pedals on it. It works great if you do it properly. That's how I ended up doing mine and it worked nicely.
Reply
Old Dec 25, 2012 | 10:00 PM
  #6  
MR.45's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 302
Likes: 3
From: Orlando
cant explain how much I appreciate this info. Rotary community ftw! =) I will try and post some pics as well in the next few weeks to show the conversion process.
Reply
Old Dec 26, 2012 | 08:00 PM
  #7  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
keep us updated with your progress!! feel free to contact me if you need any help with the swap!
Reply
Old Dec 27, 2012 | 10:54 AM
  #8  
MR.45's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 302
Likes: 3
From: Orlando
Originally Posted by mazdaverx713b
keep us updated with your progress!! feel free to contact me if you need any help with the swap!
Thank YOU!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
squirrels
1st Generation Specific (1979-1985)
10
Sep 1, 2024 09:52 AM




All times are GMT -5. The time now is 07:59 AM.