i know a guy that has a 85 gsl that he auto x's and he said he puts chainsaw oil into his gas to lubricate the apex seals.. about 6 oz. you guys think this is right.

 

smokeless, ashless, and tc-w3. Is this in addition to the MOP system?, is that 6oz per gallon or how many gallons?, and what kind?

 

Are you asking if premixing in general is right? Or the choice of oil? A lot of people use 2-stroke oil for premixing as its meant to be burned. Chain saw oil just happens to come in nice small bottles. Does that answer anything?

~T.J.

 

i just was wondering if a little bit every once in a while was ok... to lube the apex seals. like once a month or something..

 

I add 6-8 oz. of MMO or 2-cycle oil on every fillup, and my engines run smoother and smoother and smoother.

 

they arent like a hinge, it needs lubrication all the time. although if you're not driving hard the stock pump is fine. so if you're going racing, or something, putting 4-6oz in the tank (WITH stock metering pump) is a good idea

 

I use 1/2 oz. per gallon of Idemitsu on both my stockport blowthrough and my N/A half-bridge. This is per Idemitsu mixing directions. Great stuff.......Get some http://www.idemitsu-usa.com/page_210.htm

 

im not sure how to order it.. it says i have to be a wholesale customer.

 

Find a dealer near you http://www.idemitsu-usa.com/page_204.htm

 

go to your local hardwere store ang get 2 cycle

 

$5 for a gallon of 2 stroke TC-W3