Anyone use 15" 2nd Gen wheels on their 1st Gen?
Anyone use 15" 2nd Gen wheels on their 1st Gen?
Title says it all... I'm wondering how the 2nd gen "bologna slicer" wheels would look on a 1st gen. I've seen the "telephone dial" wheels on the 1st gen and it's not a geat match, but I think the slicers would look pretty good. Anyone?
#!/sup_mod/üb3rg33k
Joined: Sep 2001
Posts: 96
Likes: 0
From: Kansas City
What bolt pattern are you talking about, last time I checked 2nd gen wheels did not fit any 12a RX-7. (4x100mm)
...the GSL-SE has 4x110mm.
Perhaps the was an adapter or a wheel hub swap to make them fit.
-Error402
...the GSL-SE has 4x110mm.
Perhaps the was an adapter or a wheel hub swap to make them fit.
-Error402
Sorry... I forgot to add that it would be on the GSL-SE hubs... I had assumed that they would firt on the SE. Am I wrong? I'm not an expert on the 2nd gen by any means, but I thought they had the same lug pattern as the 1st Gen SE...
Old [Sch|F]ool
Joined: May 2001
Posts: 12,870
Likes: 574
From: Cleveland, Ohio, USA
Someone had a brain fart... 
12A cars has 4x110mm which was only shared by other early Mazdas, and a handful of 60's Corollas.
GSL-SEs had 4x4.5" (4x114.3mm if you MUST use Metric) which was used on 4-lug FCs (the baloney slicers are 5-lug) and a ton of other cars from practically every make.
12A cars has 4x110mm which was only shared by other early Mazdas, and a handful of 60's Corollas.
GSL-SEs had 4x4.5" (4x114.3mm if you MUST use Metric) which was used on 4-lug FCs (the baloney slicers are 5-lug) and a ton of other cars from practically every make.
Well... that explains why I've seen the 2nd gen "dials" on 1st gens SEs, and not the slicers. Didn't realize they were 5 lug. I did warn that I was 2nd Gen Challenged! 
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
Apr 22, 2019 01:15 PM
craaaazzy
Comments and Suggestions Archive
3
Aug 21, 2015 02:00 PM
