For anyone that has done a rear seat swap in the car please chime in....
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Florida
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
For anyone that has done a rear seat swap in the car please chime in....
picking up the rear seat off a 1st gen and wanted to make sure i had all the right parts. so far i know i need
rear seat-top and bottom
seat belts
rear seat latch??? exactly what part
and what else am i missing??? thank you
rear seat-top and bottom
seat belts
rear seat latch??? exactly what part
and what else am i missing??? thank you
#3
Back in the saddle again
iTrader: (2)
if it is the typical aftermarket one wacky is right there are 2 vynil covered cardboard panels that cover the ft seatbelts they go on the sides. Also the treaded holes for the rear seatbelts are already there on the outside they are plugged with a rubber plug you will have drill 2 holes in the tunnel for the inners though
#4
Sin City Rotary
on my SA I found that the cross member under the front of the seat was no longer cover by carper so that will need to be adressed, you can see it in this pic of my car
#5
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Florida
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
I picked everything up, hope I'm not missing anythin. Got 2 full seat belts. 2 latches and some other black latch looking thing that he said goes on the strut tower I think. Pics will be up soon.
Trending Topics
#8
RX for fun
iTrader: (13)
Unless you have a small ***, or you're a midget or less than 10 yr old kid, I dont see the purpose of having a rear seat on a SA/FB. Unlike a FC, there is no leg and head room, not to mention you're sitting on top of the rear axles; functionality over appearance. and yes, I previously owned a FC with a rear seat.
#12
Junior Member
Join Date: May 2023
Location: Buckinghamshire, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The latches
Hello, I’m pretty new on here, but i couldn’t see anywhere in this thread a source or website for getting a hold of some rear seat brackets/latches. Would you be able to point me in the right direction, I can’t seem to find them anywhere for love nor money.
#14
Junior Member
Join Date: May 2023
Location: Buckinghamshire, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for letting me know - i have the oem 1st gen rear seats, i just dont have any bracketry to secure them - i had that idea yesterday, but im not able to post on the marketplace here. Guess facebook it is. Thanks again 👍🏼
#16
Senior Member
I can't help you.... The only I can't tell you is that those rear seats are useless......No one can fit in them....Not even a kid .....
The following users liked this post:
ATC529R (08-15-23)
#17
Junior Member
Join Date: May 2023
Location: Buckinghamshire, England
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i know which is a shame, but i love the look inside the car, feel like it keeps the classic style/look of the car. I use the footwells for fluids and spares at the minute anyway!