Anybody know the size of the oil cooler o-rings?
03-15-06, 11:57 AM
#1
Anybody know the size of the oil cooler o-rings?
Mazdatrix has these for $3.93 each!!! I would like to shy away from going through them at all costs because their prices are very unreasonable (paid ~$30 just for an accelerator pump shipped), not to mention that they charge you whatever shipping they want without notice.
I want to go to a local auto parts store and purchase them there. So with that, does anybody know what size these are?
Thanks!
Justin
I want to go to a local auto parts store and purchase them there. So with that, does anybody know what size these are?
Thanks!
Justin
03-15-06, 12:20 PM
#4
I've tried to get parts from Mills Mazda in brainerd and they said that they don't have any parts for my car... 
I guess when the time comes I will just pull the rings and bring them in. I will resurrect this thread and post the size for future refrence.
I guess when the time comes I will just pull the rings and bring them in. I will resurrect this thread and post the size for future refrence.
03-15-06, 01:42 PM
#5
I noticed you have an '85GS, which means it's a beehive oil cooler, right?
victoria british has 'em slightly cheaper, and there's a thred around here somewhere on what size the o-rings are. Lemme find it.
Found it in the archive
https://www.rx7club.com/showthread.p...ighlight=viton
Jon
victoria british has 'em slightly cheaper, and there's a thred around here somewhere on what size the o-rings are. Lemme find it.
Found it in the archive
https://www.rx7club.com/showthread.p...ighlight=viton
Jon
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
