quasar

I read through the FAQ section, looked back in the archive, but i cant find the answer to my question.

I want to put my S4 turbo engine in my FB, what front cover and oil pan do I use?

Other than that I have everything else covered.

Thank you.

bad 83

iTrader: (3)

You will have to use the GSL-SE 13B oil pan. You can either ust the 12A or GSL-SE 13B front cover. Since the mop/omp from the first gen will not be adaquate enough for the TII, you can either supliment with premixing or just ditch the mop/omp all together and just premix. I opted to just premix all together. I used a 12A front cover and removed the drive gear for the mop/omp. Then made a block off plate.

quasar

So there is no difference between the way the 5 letter oil pan bolts to the 12a front cover and the 5 letter? The only difference is the oiling system? Good deal!
Thank you very much.

82transam

iTrader: (18)

Don't forget to grab the oil pickup tube for the SE pan (I think the 12a one is the same)