1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Another Starting Problem

Thread Tools
 
Search this Thread
 
Old 06-17-07, 04:20 PM
  #1  
Junior Member
Thread Starter
 
cowboy8's Avatar
 
Join Date: Apr 2007
Location: Oklahoma
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Angry Another Starting Problem

I've got an 85 rx7, 12a. Took plugs out and turned the engine over 3 or 4 times until nothing blew out. Put plugs back in and reconnected my fuel pump. Sprayed some starting fluid into carb and it started right up. had to keep the rpms at about 1200 to keep her going. Seemed like there was alot of gas in the carb bowls. once i took my foot off the acelarator she died. tryed to restart but couldnt. took plugs out again to repeat the process. There was still gas in the carb bowls but this time she wont start. Any help will be much appreciated
Old 06-17-07, 04:37 PM
  #2  
1200 gone......but......

iTrader: (24)
 
RXnos1200's Avatar
 
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes on 0 Posts
You have alot of gas in the float bowls or do you see alot of gas inside the carb?
Old 06-17-07, 07:00 PM
  #3  
Junior Member
Thread Starter
 
cowboy8's Avatar
 
Join Date: Apr 2007
Location: Oklahoma
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
alot of gas in the float bowls
Old 06-17-07, 11:25 PM
  #4  
1200 gone......but......

iTrader: (24)
 
RXnos1200's Avatar
 
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes on 0 Posts
sounds like your needle and seats are stuck. You can try tapping the carb to see if you can get it loose. Carb needs a cleaning or rebuild.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
10-13-15 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
09-07-15 11:50 AM



Quick Reply: Another Starting Problem



All times are GMT -5. The time now is 02:49 AM.