http://www.rotaryresurrection.com/2n...actuation.html

http://www.rotaryresurrection.com/2n...elec6port.html

 

thank you very much that what i was looking for

 

i have another question about this i haven't done this yet but. if the ports are working properly in the stock form can you get them to open only under load or will they open if i don't have it under load.

 

does anyone have any pics of the system using the aquarium valves would like to see a pic of this.

 

can anyone help me find some pictures? really would help me on trying to find the aquarium valve and what it looks like and how you'll have them hooked up

 

can anyone please get me a pic of this air valve i need to find im having the hardest time finding something.

 

do anyone have pics thanks

 

Ok i did it myself.

this is how i did it

take off the intake tubing and the maf sensor.then
first i drilled a hole in the air pump hose

then i put a screw in brass fitting that i got at a hardware store. then i put black sealer and adhesive around it like this

then i hooked up a hose to that then to my inlet of my aquarium air valve (for this part it might be kind of hard to find so go to your largest pet store they should have them or order them off the internet make sure it made out of metal. take all the plastic brackets off of it.) you can mount this any where just make it easy to get to so you can adjust it. I almost mounted it here but changed my mind


than all you have to do is is take one of the outlets on the valve hook a hose to that and run it to your intake nipple where the ports get their air from and thats it