air/fuel mix
05-09-04, 11:06 AM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
air/fuel mix
well, i've been messing with my carb a bit (till i get the rest of my turbo stuff) and noticed that when i mess with the air/fuel mix screw... nothing changes. it has a super slight hesitation as soon as i blip the throttle. sounds like it needs a tad bit more fuel. or sounds like the accellerator pump. not sure though. but i can turn the mix screw all the way out and my idle will not change at all. hmmmm. 
idles perfectly at 750 and drives great, minus that blip hesitation. wizierd. haha
-zacaroo
idles perfectly at 750 and drives great, minus that blip hesitation. wizierd. haha-zacaroo
05-09-04, 11:59 AM
#2
Rotary Enthusiast
With the engine running, turn the fuel/air mixture screw all the way until it starts to die, then back off 1 full turn.
Do this when the engine is warm. Could be a accerator pump not giving you a squirt under takeoff.
John
Do this when the engine is warm. Could be a accerator pump not giving you a squirt under takeoff.
John
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM