1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

aftermarket tie rods and tension rods and control arms and questions

Thread Tools
 
Search this Thread
 
Old Jan 2, 2006 | 07:44 PM
  #1  
d0 Luck's Avatar
Thread Starter
raysspl.com
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 3,508
Likes: 0
From: L.A.
Arrow aftermarket tie rods and tension rods and control arms and questions

do we have aftermarket support for these items???

also, what aftermarket bushings (overall) do you guys recommend for the best bang for the buck?

and can someone link me up to the remedy for the loose steering feel? mine's is getting to that point, even when i tightened the gears up is still getting loose over time, which is a temporary solution btw.

thanks
Reply
Old Jan 2, 2006 | 07:50 PM
  #2  
riceburner1r2001's Avatar
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
racing beat or mazdatrix have aftermarket control arms as of the tension rods all i did was get energy polyurethane bushings for that and made alignment better just make sure u mark where they were at as of for the loose steering u can try replacing the idler arm bushings on the passenger side if that doesnt work u might have to get a new or used steering box hope that helps
Reply
Old Jan 2, 2006 | 07:50 PM
  #3  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
There is not a lot for the front end other than poly, I am working with a machine shop and hopefully will have an option soon, bwaits is also working on some suspension components.

You need to check the FB steering threads, there is one that is more detailed and shows more adjustments to eliminate wander steer.
Reply
Old Jan 2, 2006 | 08:38 PM
  #4  
31rx7's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 515
Likes: 1
From: Hilliard, OH
Before messing with the steering column, check and replace everything else.

A little bit of play in the wheel bearings, tie rod ends, idler arm, etc. all adds up to significant play in the steering.

On your question about aftermarket support, tie rod ends, tie rods, and most other front end bushings / components are available through NAPA or Victoria British. There are also usually items on eBay.
Reply
Old Jan 2, 2006 | 09:47 PM
  #5  
d0 Luck's Avatar
Thread Starter
raysspl.com
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 3,508
Likes: 0
From: L.A.
yeah thanks guys. it seems that mazdatrix, RB, and VB are the resources available... mazdatrix so far is decently priced, but i don't understand why their replacement control arm is very expensive. ill keep on searching.

aussiemg, let us know what new FB parts coming out
Reply
Old Jan 3, 2006 | 03:25 AM
  #6  
d0 Luck's Avatar
Thread Starter
raysspl.com
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 3,508
Likes: 0
From: L.A.
btw do you guys know where else to look for bushings and/or bushings kit besides mazdatrix and vb? i haven't checked vb yet though.... i'm trying to get it as cheap as i possibly i can.

any help would be appreciated
Reply
Old Jan 3, 2006 | 06:55 AM
  #7  
cpa7man's Avatar
Racing is life!
iTrader: (2)
 
Joined: Jan 2003
Posts: 2,173
Likes: 0
From: Grapevine, TX
http://www.mazspeed.com/steeringgear.htm

the FSM has a procedure in it as well to adjust the steering.
Reply
Old Jan 3, 2006 | 10:06 AM
  #8  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

eBay has them from time to time, email this guy.
Reply
Old Jan 3, 2006 | 03:43 PM
  #9  
riceburner1r2001's Avatar
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
energy suspension itself i think there n irvine
Reply
Old Jan 3, 2006 | 04:36 PM
  #10  
Kentetsu's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
http://p-s-t.com/fekpgimp.html
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fjwheeler
3rd Generation Specific (1993-2002)
22
Jan 9, 2022 01:02 PM
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
Aug 15, 2015 10:32 PM




All times are GMT -5. The time now is 09:01 AM.