RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   aftermarket tie rods and tension rods and control arms and questions (https://www.rx7club.com/1st-generation-specific-1979-1985-18/aftermarket-tie-rods-tension-rods-control-arms-questions-495730/)

d0 Luck 01-02-06 07:44 PM

aftermarket tie rods and tension rods and control arms and questions
 
do we have aftermarket support for these items???

also, what aftermarket bushings (overall) do you guys recommend for the best bang for the buck?

and can someone link me up to the remedy for the loose steering feel? mine's is getting to that point, even when i tightened the gears up is still getting loose over time, which is a temporary solution btw.

thanks

riceburner1r2001 01-02-06 07:50 PM

racing beat or mazdatrix have aftermarket control arms as of the tension rods all i did was get energy polyurethane bushings for that and made alignment better just make sure u mark where they were at as of for the loose steering u can try replacing the idler arm bushings on the passenger side if that doesnt work u might have to get a new or used steering box hope that helps

aussiesmg 01-02-06 07:50 PM

There is not a lot for the front end other than poly, I am working with a machine shop and hopefully will have an option soon, bwaits is also working on some suspension components.

You need to check the FB steering threads, there is one that is more detailed and shows more adjustments to eliminate wander steer.

31rx7 01-02-06 08:38 PM

Before messing with the steering column, check and replace everything else.

A little bit of play in the wheel bearings, tie rod ends, idler arm, etc. all adds up to significant play in the steering.

On your question about aftermarket support, tie rod ends, tie rods, and most other front end bushings / components are available through NAPA or Victoria British. There are also usually items on eBay.

d0 Luck 01-02-06 09:47 PM

yeah thanks guys. it seems that mazdatrix, RB, and VB are the resources available... mazdatrix so far is decently priced, but i don't understand why their replacement control arm is very expensive. ill keep on searching.

aussiemg, let us know what new FB parts coming out :)

d0 Luck 01-03-06 03:25 AM

btw do you guys know where else to look for bushings and/or bushings kit besides mazdatrix and vb? i haven't checked vb yet though.... i'm trying to get it as cheap as i possibly i can. :)

any help would be appreciated

cpa7man 01-03-06 06:55 AM

http://www.mazspeed.com/steeringgear.htm

the FSM has a procedure in it as well to adjust the steering.

aussiesmg 01-03-06 10:06 AM

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

eBay has them from time to time, email this guy.

riceburner1r2001 01-03-06 03:43 PM

energy suspension itself i think there n irvine

Kentetsu 01-03-06 04:36 PM

http://p-s-t.com/fekpgimp.html


All times are GMT -5. The time now is 03:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands