sleek85

i have recently been given my first rx it is an 85 12a. but i am having problems withit.
first of all when the choke is out it runs up to 3000rpm. the second is that after the car is warmed up it dies when put in drive. i have been working on it for weeks checking and replacing parts. also the haynes manuel doesn't adress this problem.

mazdaverx713b

iTrader: (91)

the engine should rev to 3000 when the choke is pulled. don't know much about the jatco trans. sorry. its probably a solenoid that has gone bad.

sleek85

it seems to me that it is more of a fuel or vacuum problem but i have completly run out of ideas

sleek85

iwent out to work on it today now it tries to start but only goes to 1500 with choke out then dies

mazdaverx713b

iTrader: (91)

it could be something with the fuel/air mixture. touch that screw and you could have some emission problems at the least.

slashdawg00110

before you even think about touching the carb, check all the vacuum lines. Then look at the no-start thread in the FAQ (I know, it starts, but the thread still has some goodies for you).

I vote for vacuum leak.

Bob Holton

A bit of wd40 sprayed on the lines when you do get it running sometimes show up the leaks

sleek85

first of all i live in alabama no emissions checks i,ll try some of these ideas any others would be appreciated