85 Front Wiper motor
#1
Newbie
Thread Starter
85 Front Wiper motor
Hi all! I haven't been on this forum since 2010 so it seems and it won't let me create a listing in the marketplace, I'm assuming that's the reason why anyway. So if there is anyone with a working and in good order Front Wiper motor for an 85 or knows where to get one it would be greatly appreciated!
#2
Full Member
Hi all! I haven't been on this forum since 2010 so it seems and it won't let me create a listing in the marketplace, I'm assuming that's the reason why anyway. So if there is anyone with a working and in good order Front Wiper motor for an 85 or knows where to get one it would be greatly appreciated!
I would check on EBay ... Good Luck
#3
Censored
iTrader: (14)
If you want a new one, check rockauto:
https://www.rockauto.com/en/catalog/...per+motor,8824
But there's probably some used ones out there for a decent price.
https://www.rockauto.com/en/catalog/...per+motor,8824
But there's probably some used ones out there for a decent price.
#4
Senior Member
If you want a new one, check rockauto:
https://www.rockauto.com/en/catalog/...per+motor,8824
But there's probably some used ones out there for a decent price.
https://www.rockauto.com/en/catalog/...per+motor,8824
But there's probably some used ones out there for a decent price.
And you will be without wipers for a while......
#5
RX HVN
iTrader: (2)
And a tip for you: wipers need to be 'parked' in up right position to most easily pull the motor/transmission assy.
Also, the harness connector from the motor to the cars main harness can disintegrate from sun/UV (mine fell apart in my hand as I disconnected it. And that was 15 yrs ago). So make sure it isn't just the connection that has caused the failure! And on that note you will want to replace the harness connection. For that you can go to Easternbeaver.com - who sell OE style new harness connections.
Stu A
80GS
AZ
Also, the harness connector from the motor to the cars main harness can disintegrate from sun/UV (mine fell apart in my hand as I disconnected it. And that was 15 yrs ago). So make sure it isn't just the connection that has caused the failure! And on that note you will want to replace the harness connection. For that you can go to Easternbeaver.com - who sell OE style new harness connections.
Stu A
80GS
AZ
The following users liked this post:
mazdaverx713b (04-23-21)
#6
Rotary Enthusiast
Stu, please upload a searchable version of your brain!
The following 2 users liked this post by Toruki:
7aull (04-22-21),
mazdaverx713b (04-23-21)
The following users liked this post:
Frogman (04-23-21)
Thread
Thread Starter
Forum
Replies
Last Post