85 12A timing/miss fires problem!
#1
Rotary Enthusiast
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
85 12A timing/miss fires problem!
my 85 12 A rex has odd miss fire, when i try to time it. the yelow mark dose not apear till i rev it up some, then when it idles i shows up but it jumps i cant have it timed perfect and then it will jump 1" from where it was at. and it seam to only hapen after a miss fire. I was wunering if that would be from a bad distrebutor system i changed the spark plugs, cap and rotor. the trailing timing mark is allso doing this.
thanks for your help
thanks for your help
#2
Rotary Enthusiast
iTrader: (1)
Do a search seriously search you will find the info you need. To help you out you need to have the motor revved to 4000rpm's to time it properly. Disconnect the vacuum advance and plug the vacuum hose to the motor so you don't have a leak. You rev the motor to 4000rpm's so you have full advance and then you can make your adjustments. I'm not going into full detail here because like I said do a search.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM