84 rx7 Couple Questions
#1
Senior Member
Thread Starter
Join Date: Jan 2006
Location: Cali Baby
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
84 rx7 Couple Questions
Im doin a 13b 6 port swap. I just bougth 13b 6 port headers and I already have a powerpulse muffler for my 12a engine.
1]What other components do i need to complete my exhaust for this swap? I know i need to make it straight but how?
2] I replaced my gaugse cluster recently and when i took the tseering wheel off a little 2 inch pin fell out that had a small spring on it. I think it is for the horn because now my horn will not work.
Does anyone know where it goes?
1]What other components do i need to complete my exhaust for this swap? I know i need to make it straight but how?
2] I replaced my gaugse cluster recently and when i took the tseering wheel off a little 2 inch pin fell out that had a small spring on it. I think it is for the horn because now my horn will not work.
Does anyone know where it goes?
#3
Terrified.
After your presilencer, you need a straight pipe that you could get anywhere, then a muffler. Perhaps even another presilencer in between. The entire setup will have to be custom.
As far as the pin/spring thing, I agree with thekyl, Haynes manual.
As far as the pin/spring thing, I agree with thekyl, Haynes manual.
#5
Terrified.
Originally Posted by trochoid
Let's see, the SE has a 6-port 13B, you're installing a 6-port 13B. Do we all suppose that maybe they will take the same exhaust system, even maybe the RB one?
Spring goes between the steering wheel and horn button.
Spring goes between the steering wheel and horn button.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
thecody59
1st Generation Specific (1979-1985)
40
08-23-15 06:41 PM