84-85 13B Rx7 Rear Housing to Throttle Body Hose (N304-13-208A) - NLA
84-85 13B Rx7 Rear Housing to Throttle Body Hose (N304-13-208A) - NLA
what are you using to replace this hose since it is no longer available?
84-85 GSL SE 13B Rx7 Rear Housing to Throttle Body Hose (N304-13-208A) - NLA
84-85 GSL SE 13B Rx7 Rear Housing to Throttle Body Hose (N304-13-208A) - NLA
Joined: Aug 2010
Posts: 1,416
Likes: 5
From: East Palestine, Oh
https://www.rx7club.com/1st-generati...-hoses-528543/
looks like most stop the water from going to the tb, or replace with a longer regular hose.
looks like most stop the water from going to the tb, or replace with a longer regular hose.
Joined: Mar 2001
Posts: 31,837
Likes: 3,234
From: https://www2.mazda.com/en/100th/
i think you could probably get an S4 or S5 NA one, and cut it to make it fit.
i'm not sure its the same diameter, but the Miata 1.6 has a hose a lot like that
i'm not sure its the same diameter, but the Miata 1.6 has a hose a lot like that
Just to close out this thread with my solution . I used Gates #18030 and trimmed to fit.
just don't trim it too short on either leg because it needs to bend around the upper intake manifold runner
just don't trim it too short on either leg because it needs to bend around the upper intake manifold runner
