81 rotor housings using a thermal reactor
#1
Full Member
Thread Starter
Join Date: Oct 2006
Location: maryland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
81 rotor housings using a thermal reactor
Fellas,
If I rebuild an '80 model rx-7 12A engine with 81 rotor housings will I still be able to hook up the thermal reactor and associated exhaust equipment for the smog system in an otherwise stock car?
Thanks,
Peacedog
If I rebuild an '80 model rx-7 12A engine with 81 rotor housings will I still be able to hook up the thermal reactor and associated exhaust equipment for the smog system in an otherwise stock car?
Thanks,
Peacedog
#2
Old Fart Young at Heart
iTrader: (6)
Iirc, the later housings have a little divot where the port is drilled out in the earlier housings. I see no reason why you couldn't drill out the matching holes that are needed for the thermal reactor system. Take a close look at the exhaust sleeves, you may need to swap those out.
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
09-02-15 06:35 AM