3rdgen TII swap into 1stgen
Dorifto Tengoku No More
Joined: Nov 2002
Posts: 1,331
Likes: 0
From: On the mountain of Thessaloniki, Greece
HEAVY METAL THUNDER
Joined: Oct 2002
Posts: 3,864
Likes: 0
From: Elsenborn, Belgian Eifel
Fanis, AJC-13B has a cosmo engine, which is close, but it's not a 3rd gen one!
Nevertheless, it'd be a better choice because it's simular, yet cheaper.
Also done by some else on the forum before, believe Mike is his name.
Hardest part? Getting it to run. Basicly dropping it in wouldn't require that much work. You'd need a flywheel and gearbox that fits the engine and the car. TII is best option, but requires some work to get it into the car. Basicly you could use a FB tranny, but I don't think it's gonna last long...
Problem would be the ECU. Aftermarket would be best idea.
Remember: you'll need a custom exhaust, an aftermarket ECU, some fabrication work, a lot of tuning work... It's gonna cost BIG $$$. If you have the money and time, and courage, yes it can be done. Just think about it, as you really have to be able to afford such a swap. And the whole thing will probable cost you near the price of an FD anyway...
Nevertheless, it'd be a better choice because it's simular, yet cheaper.
Also done by some else on the forum before, believe Mike is his name.
Hardest part? Getting it to run. Basicly dropping it in wouldn't require that much work. You'd need a flywheel and gearbox that fits the engine and the car. TII is best option, but requires some work to get it into the car. Basicly you could use a FB tranny, but I don't think it's gonna last long...
Problem would be the ECU. Aftermarket would be best idea.
Remember: you'll need a custom exhaust, an aftermarket ECU, some fabrication work, a lot of tuning work... It's gonna cost BIG $$$. If you have the money and time, and courage, yes it can be done. Just think about it, as you really have to be able to afford such a swap. And the whole thing will probable cost you near the price of an FD anyway...
The AUTO DOCTOR
Joined: Mar 2001
Posts: 1,952
Likes: 0
From: South Side of ATL. Ga.
well theres also a local fb with a 3rd gen motor in it and a cartech kit... its FAST 
and ajc13b SOLD his car.... boooooooo but there is a fast *** jc based fb in aussy some place
and ajc13b SOLD his car.... boooooooo but there is a fast *** jc based fb in aussy some place
Trending Topics
Joined: Mar 2002
Posts: 920
Likes: 0
From: exit 8 in Manchester, NH
I am putting a 96 cosmo engine in, using a TII tranny and a Haltech computer. So far things have gone kinda smooth, ended up having to rebuild the engine, now I am just doing final clean up, should be looking at mounting it soon.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
acha3
2nd Generation Specific (1986-1992)
7
Sep 6, 2015 08:14 AM
