just like the title says, is this a good idea? are they compatable?

 

With some work yes

 

Its an AWEsome idea!!

Will take some work to get it to function right, but my understanding is its good for upwards for 20hp gains!

Good luck,

and do a search. I know this was covered fairly in-depth a while back.

 

Put a carb on it......

 

no carb, but i do have an 86 engine with a blown apex seal, that i can get an intake off. what would i need to do to swap em?

 

it isn't a dirrect swap is it?

 

i searched and didn't find much....i dont have the afm, is there a benifit in upgrading the dynamic effect chamber?

 

only way you'd get 20 hp out of it is to swap the ECU and everything over.

 

is it possible to run it without an amf? or will it run like ****? im thinking ill change the dynalic effect chamber.

 

you will have to run the afm. i am pretty sure it doesnt take much to do the 2nd gen intake manifold swap though.

 

Search for, "Got and SE, You gotta do this mod"

 

Or if you're too lazy, click here:

https://www.rx7club.com/showthread.p...gotta+this+mod

 

Like the thread suggests:
It is considered an "upgrade" to the SE setup. Much of this comes from a larger AFM inlet. The intake manifolds and throttle body is a slightly better design but I beleive 20hp is a bit much to expect. FC's made 146hp compared to the 135hp of the SE. FC 13bs had lighter rotors and a different ECU running it all.

Personally, I would save my time and get a Weber. If ya just love that EFI, Haltech and the FC intake....then you will see your 20hp and a horizon of possibility

Good luck

 

so i should upgrade the afm....anything better than a 2nd get one to do it with? (if i gotta buy one anyway) is it possibly to use a hotwire afm from a miata? i have one, but dont know if it would work.

 

will an fc computer work on an fb?

 

Send an email to Kevin at Rotary Ressurection.com

He did this mod to my SE (and I LOVE it!), but he can explain what all is needed.

 

is a hotwire sensor compatable? is there a kit to change it?

 

could i use a 91 cpu?

 

if you are going to do this swap, donot waiste your time with the s4 intake.. the s5 is a lot better.

 

ive got s4s available tho

 

i donot know if the s4 injection will be worth your time. you will not see much gain (probably 10-15hp)

 

thats good enough! thats alot!