1st Gen WIRING GURUS, Need your help.
06-02-08, 03:07 PM
#1
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
1st Gen WIRING GURUS, Need your help.
My car had a TII swap done before, I pulled everything apart and now I'm putting everything back together. I came across a wire in the engine bay that's just sitting there. I forgot where it came from, not sure if it needs to be grounded or supplied with 12V.
I traced the wire down to the back of the Ignition Switch on the steering Column. Looking at the back of the switch, it's the thick black wire with a red stripe.
Does anyone know what this should go to ?
I traced the wire down to the back of the Ignition Switch on the steering Column. Looking at the back of the switch, it's the thick black wire with a red stripe.
Does anyone know what this should go to ?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM