1st gen 4sale
#1
Junior Member
Thread Starter
Join Date: Jun 2021
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
1st gen 4sale
Hi folks, new to this site so not sure if this is even the right place for this. Due to life requirements must sell my 1st gen 79 rx7. Second owner, inherited it from my father. He started the process and I have continued to try and improve, anyway here is where the car stands. Rolls on 15 inch gold Enkes, an 83 gsl/se limited slip disc brake rear end. Rebuilt disc brakes on the front Just had a 13b built and installed. S4 86-88 housing lapped and street ported, 13b S5 '91 rotating assy., polished, balanced w. 3MM groove machining. Cryo treated 3MM apex and corner seals. FB '85 13b oil pan, 13b NA lightened flywheel, 13b NA rear counterweight. 13b 6 port side draft intake, Mikuni 40/44 type S5 side draft carb. Aluminum 3 row radiator. 87 FC clutch master and slave cylinders. exedy stage 2 clutch kit. exhaust header. New fuel pump and oil catch can. Also have the original wheels and glass and original metal sunroof. As with any car this age does need some TLC. Fuel tank flushed and cleaned. Runs strong
Need to get $7000 for it with a lot more than that into it. Living in NC, anybody know anybody interested please respond to this link, or let me know where I need to go to try and sell
Thanks
Need to get $7000 for it with a lot more than that into it. Living in NC, anybody know anybody interested please respond to this link, or let me know where I need to go to try and sell
Thanks
#4
Have RX-7, will restore
iTrader: (91)
It does sound like a beautiful car with some very tasteful mods. However, as mentioned above, you'll have to post this in the marketplace section. You'll require a couple of posts and 24 hours of membership to be able to view the classifieds (marketplace) section. I'm going to close the thread. Please feel free to pm me should you have any questions.
Thread
Thread Starter
Forum
Replies
Last Post