I am restoring a 79' RX7 that had been left in a field for sometime. The mice had created multiple homes in the engine compartment and chewed through sections of the wire harness (loom). I have pieced the majority of the harness together except for the coil wires to the distributor. The manuals I have purchased reference the yellow with black stripe and yellow wires from the coils yet in addition to these wires I have a yellow with red stripe and yellow with blue/green stripe. The distributor connectors are nowhere to be found. Can anyone give me some assistance in making the correct distributor connections?

Thanks,

Mike

 

You may have to look in the wiring section under the UK models. Thats what I had to do. I have the harness that connects between the coils and the distributor. It's the main connector out of a 1980 Rx7. Has about 4 inches of wire on each side. I will sell it to you for shipping cost if you need it.