13B 6 Port Turbo Project
#76
The Shadetree Project
iTrader: (40)
Back on topic. Are saying that with an rx-4 bell housing on a t2 tranny can you use a NA flywheel, clutch, and starter, or is it just the clutch? Cause I have a light weight flywheel and aftermarket clutch on my car and that's why I haven't swapped to the t2 tranny sitting my my garage. I didn't want to have to spend the money getting a new Flywheel, clutch, and starter.
#77
Banned. I got OWNED!!!
Thread Starter
iTrader: (30)
Join Date: Feb 2007
Location: Cali Native
Posts: 3,608
Likes: 0
Received 0 Likes
on
0 Posts
RX-4 top mount bell housing. You can use the T2 tranny somewhat with the NA clutch setup and flywheel. However, you will need to get a custom driveshaft. You also need to shorten the tail shaft housing cause those trannys stick back farther. However, in regards to the clutch setup, you can keep the pressure plate but not the clutch disc, you will need a custom disc made as well which can be done at Clutchmaster's they know about it. I can give you the specs if you want.
In regards to the wheels, I love how they look, Enkie or not still pimpin!!
In regards to the wheels, I love how they look, Enkie or not still pimpin!!
#79
Banned. I got OWNED!!!
Thread Starter
iTrader: (30)
Join Date: Feb 2007
Location: Cali Native
Posts: 3,608
Likes: 0
Received 0 Likes
on
0 Posts
At this time I'm still collecting parts and paying for the rebuilt. As stated before I had picked up a slightly blown S5 TII core motor and I've doing a full 2MM race apex seals rebuild on it, as well as a monster street port. The plan is to finish up the motor, re-do the fuel setup with an MSD fuel pump and Mallory 4309 FPR, then run NA for a little to break in the motor. I recently purchased the 4309 and already am going to be getting the MSD fuel pump soon as well.
Once that's done and done, the last initial steps will just be to buy the turbo, figure out my FMIC setup, and get things going. Ideally I plan to be done by this summer so we'll see. Hoping to finish paying off the rebuild parts for the motor and getting that done ASAP.
Once that's done and done, the last initial steps will just be to buy the turbo, figure out my FMIC setup, and get things going. Ideally I plan to be done by this summer so we'll see. Hoping to finish paying off the rebuild parts for the motor and getting that done ASAP.
#81
Banned. I got OWNED!!!
Thread Starter
iTrader: (30)
Join Date: Feb 2007
Location: Cali Native
Posts: 3,608
Likes: 0
Received 0 Likes
on
0 Posts
Haven't installed the Mallory 4309 FPR and the MSD fuel pump yet -- waiting for turbo setup. Installing an MSD6A box and my new aluminum racing radiator with custom fan/shroud setup this week. Also throwing in an Optima Red Top battery with new terminals as well.
Right now I plan to finish the rebuilding and throw in the motor NA for a bit with the large street port. Also changing out my exhaust setup as well. Turbo will be added on shortly after. Just been lagging on the rebuild because of bills, etc. More pics to come next week!
Right now I plan to finish the rebuilding and throw in the motor NA for a bit with the large street port. Also changing out my exhaust setup as well. Turbo will be added on shortly after. Just been lagging on the rebuild because of bills, etc. More pics to come next week!
#84
Resident autoglass pro
iTrader: (1)
Join Date: Jul 2003
Location: edinburg PA
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Haven't installed the Mallory 4309 FPR and the MSD fuel pump yet -- waiting for turbo setup. Installing an MSD6A box and my new aluminum racing radiator with custom fan/shroud setup this week. Also throwing in an Optima Red Top battery with new terminals as well.
Right now I plan to finish the rebuilding and throw in the motor NA for a bit with the large street port. Also changing out my exhaust setup as well. Turbo will be added on shortly after. Just been lagging on the rebuild because of bills, etc. More pics to come next week!
Right now I plan to finish the rebuilding and throw in the motor NA for a bit with the large street port. Also changing out my exhaust setup as well. Turbo will be added on shortly after. Just been lagging on the rebuild because of bills, etc. More pics to come next week!
Nice setup as well, I like the shade of blue on your car.
A question for both of you though. Why the side draft setup over say, a Holley 4 barrel, or alternative carb. setup?
Thanks-
#85
Post Pimp
iTrader: (1)
Join Date: May 2003
Location: Spokane valley, Washington
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
Adrian you can come over time. we could have a bbq and maybe get a few others from the west side. I need to get a jet pak.
I like the look and the sound of the webber. and they are easy to work on.
Why the side draft setup over say, a Holley 4 barrel, or alternative carb. setup?
#86
Banned. I got OWNED!!!
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM