13B 6 Port Turbo Project
Alright, so I'm finally getting things going. I have an 85 S model RX7 that has a very nice 13B 6 port motor in it. The motor is stock port but is very strong and runs great. Right now I have a Weber 48DCOE carb with Racing Beat upper and lower manifolds, with a full exhaust this is quite a powerful setup. At the moment I'm in the process of adding turbo application to this car, so this is the beginning. I'm planning to use the following for this setup..
Stock S5 turbo Custom turbo exhaust manifold (RotaryShack) Custom mandrel 3" exhaust (RotaryShack) MSD fuel pump Mallory fuel pressure regulator MSD blaster 2 coils (2x) Locked dizzy (RotaryShack) 6 Puck Race Clutch and upgraded PP Intercooler (?) Custom Carb Hat (RotaryShack) Right now I already bought my clutch and fortunately do have a very nice oldschool Spearco intercooler that I might use, might not right off the bat. I'm in the process of purchasing the custom carb hat, fuel pump, FPR, and down pipe. Also already have one MSD Blaster 2 coil just need to grab one more off ebay or something. So, right now I'm in the market for a used S5 turbo and once I get that, will purchase the custom turbo exhaust manifold (expensive). I will be posting pictures up as I get new items and once we do the actual install. I plan to have this turbo setup complete as well as a nice new paint job before Sevenstock XI so should be interesting to see the completion progress. For people who are interested in learning more about blowthrough turbo setups this thread will help. This is semi-cost effective way to do it and depending on your motor could turn out well. Look forward to seeing pics of the intercooler and clutch setup tomorrow. Here's a picture of the car and engine bay as of now: http://i195.photobucket.com/albums/z...7/IMG_1402.jpg http://i195.photobucket.com/albums/z...7/IMG_0770.jpg |
Also, for anyone in socal that has an FB, Once I do this setup change I will be selling my racing beat road race headers (dual inlet/outlet) as well as my racing beat street port prima flow muffler, so if you wanna call dibs on either let me know. The headers sell new from RB for $240.. with tax and shipping probably comes out to $290, i'm willing to sell for $200 shipped or $175 pickup. The muffler sells for $315 new so probably about $380 tax and shipped.. I will sell for $275 shipped or $230 local pickup.
|
sweet ride, GL with the blowthrough setup, very interested, subscribed!
|
Thanks buldzor, I'm hoping everything works out great.
Update: Ordered a stage 2 clutch from F1 Gripforce arrived this past weekend and is being installed today. The 6 puck race clutch seems to be good but like I said I will eventually need to get the racing beat pressure plate, the one it came with isn't that great. The carb hat, MSD fuel pump, and Mallory FPR will be arriving next week friday. I might be picking up the turbo this weekend and if so will throw up some pics. |
Subscribed as well :) Keep it up, can't wait to see the power levels :D
|
I know this is a stuped quetion,but what size is the radiator fan??? :) .Sorry for hijaking your thread...
|
Update:
So, the carb hat plenum and MSD fuel pump will be arriving this friday. I'm also purchasing a S5 turbo off a j-spec motor this week as well. Finally, on friday I'm getting a brand new 2-1/2" downpipe from racing beat. All that's left will be to buy the Mallory FPR and get the custom turbo exhaust manifold from my mechanic. Still debating if I'm going to use the intercooler or not. |
Originally Posted by Cbz
(Post 8491904)
Update:
So, the carb hat plenum and MSD fuel pump will be arriving this friday. I'm also purchasing a S5 turbo off a j-spec motor this week as well. Finally, on friday I'm getting a brand new 2-1/2" downpipe from racing beat. All that's left will be to buy the Mallory FPR and get the custom turbo exhaust manifold from my mechanic. Still debating if I'm going to use the intercooler or not. |
Originally Posted by Jeezus
(Post 8491956)
Use an intercooler! I have a W2A here with me.
|
Originally Posted by Cbz
(Post 8491959)
W2A? What's that? Haha. I want to use one.. but I gotta figure out how much more it will cost me for piping and installation..
But if you went air to air, it would cost about 200-300$, depending mostly on your core. EBay will be your friend for the core and piping. Piping usually runs about 50$ a set, for good pipes that you will use, comes with couplings. Just don't go too big on the IC, and if you go in on one side and out on the other, you will have to relocate your battery. PM me if you have questions :) |
Originally Posted by Jeezus
(Post 8491966)
Water to Air intercooler. More expensive, etc.
But if you went air to air, it would cost about 200-300$, depending mostly on your core. EBay will be your friend for the core and piping. Piping usually runs about 50$ a set, for good pipes that you will use, comes with couplings. Just don't go too big on the IC, and if you go in on one side and out on the other, you will have to relocate your battery. PM me if you have questions :) |
Love the attention to detail and show quality of the body and engine bay. Keep up the great work. :icon_tup:
|
Originally Posted by trochoid
(Post 8492044)
Love the attention to detail and show quality of the body and engine bay. Keep up the great work. :icon_tup:
|
is ur carb already boost preped?
|
Originally Posted by MaX PoWeR
(Post 8492725)
is ur carb already boost preped?
|
nice
|
where did u get ur carb from? rotary shack?
|
Originally Posted by MaX PoWeR
(Post 8492913)
where did u get ur carb from? rotary shack?
|
So i guess u found a turbo....
|
Originally Posted by CHINX74RX2
(Post 8493525)
So i guess u found a turbo....
|
i was just testing the waters....thanks tho..
|
Originally Posted by CHINX74RX2
(Post 8496520)
i was just testing the waters....thanks tho..
|
XS Power on eBay has decent intercoolers and custom turbo headers for 13Bs. Stay away from their turbos. The manis they have are setup for T4 turbos and fit around the TII intake mani. There are ways to mod either stock S4 or S5 turbo mani to fit around the SE intake. It's not that expensive to do, takes a couple of header flanges and 2 short pieces of schedule 40 pipe. That will tilt and push the turbo away from the intake runners. The same mods can be done to XS Power's turbo header and the oem turbo can be used by changing the mounting flange.
The way the XS mani is made, extending it out may cause clearance problems between the turbo and inner fender if the above mentioned mods are made. I have test fitted the XS mani and turbo on an FC and clearance is tight. If you have any other questions about modding the exhaust mani, PM me. |
looking awesome Matt that thing is gonna fly
|
Here's some pics of the intercooler, MSD Fuel Pump, and Turbo Plenum Carb Hat..
http://i195.photobucket.com/albums/z39/cbz87/MSDFP1.jpg http://i195.photobucket.com/albums/z...ntercooler.jpg http://i195.photobucket.com/albums/z...mCarbHat-1.jpg http://i195.photobucket.com/albums/z...mCarbHat-2.jpg http://i195.photobucket.com/albums/z...mCarbHat-3.jpg |
All times are GMT -5. The time now is 11:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands