13b
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: Adelaide, South Australia
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
13b
Hey guys,
I think I'm going to sell my 12a 1st gen and buying one with a 13b in it (will have to have been modded as I'm in oz, no gsl-se!).
I was wondering what sort of 0-100 kph and 1/4 mile time would you expect from a 1st gen with a 13b with a full exaust system and a street port?
Thanks guys!
Browney
I think I'm going to sell my 12a 1st gen and buying one with a 13b in it (will have to have been modded as I'm in oz, no gsl-se!).
I was wondering what sort of 0-100 kph and 1/4 mile time would you expect from a 1st gen with a 13b with a full exaust system and a street port?
Thanks guys!
Browney
#4
Full Member
Join Date: Nov 2002
Location: kANSAS, Y'ALL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
besides that some (not all ) 2nd gen had mad problems with wiring and sub-stanard solder that caused even more problems. Although this is only true with some of the earlier 2nd gens i still wouldn't buy a 2nd gen for that reason.
#5
male stripper
iTrader: (1)
Originally posted by jalvord_2003_68_01
besides that some (not all ) 2nd gen had mad problems with wiring and sub-stanard solder that caused even more problems. Although this is only true with some of the earlier 2nd gens i still wouldn't buy a 2nd gen for that reason.
besides that some (not all ) 2nd gen had mad problems with wiring and sub-stanard solder that caused even more problems. Although this is only true with some of the earlier 2nd gens i still wouldn't buy a 2nd gen for that reason.
#7
i say what i want
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
:
also, i agree with the 13b, but seriously, do it yourself.. then you can have the pride in it. and when/if something goes wrong, you have a good idea where the problem is
also, i agree with the 13b, but seriously, do it yourself.. then you can have the pride in it. and when/if something goes wrong, you have a good idea where the problem is
Trending Topics
#8
Full Member
Thread Starter
Join Date: Nov 2002
Location: Adelaide, South Australia
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Nah, I want I new car because mine is cheap and not in the best nick. I wan't a perfect one with a 13b in it that I can mod up. 12a turbos are still hard to find in aus!
#9
Full Member
Thread Starter
Join Date: Nov 2002
Location: Adelaide, South Australia
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the answer to my question though?
"I was wondering what sort of 0-100 kph and 1/4 mile time would you expect from a 1st gen with a 13b with a full exaust system and a street port?"
"I was wondering what sort of 0-100 kph and 1/4 mile time would you expect from a 1st gen with a 13b with a full exaust system and a street port?"
#11
Maybe around 14 seconds @100 MPH.. given you have everything else set up properly: correct and tuned carb, a grippy clutch, lightened vehicle AND traction! Just an estimate.
#17
roadkill hats rock
Join Date: Jul 2001
Location: Austin, Texas
Posts: 1,396
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AJC13B
I still have a standard interior and paint/body! Interior won't be standard for long though!
I still have a standard interior and paint/body! Interior won't be standard for long though!
your steering wheel is on the wrong side though
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM