1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

12a Throttle Cable Vs. -SE 13b on engine swap

Thread Tools
 
Search this Thread
 
Old May 1, 2005 | 12:28 AM
  #1  
Paradox's Avatar
Thread Starter
backyard tuner
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,265
Likes: 0
From: BC, Canada
12a Throttle Cable Vs. -SE 13b on engine swap

well im about 90% done my -SE 13b swap into my GS, right now its down to wiring and scoring some parts, one of which is the throttle cable.

from what i've read the 12a throttle cable hooks right up? uhhhh, no. the housing is roughly the same length, but the cable on the 13b is much longer from what i've seen in pics.

can anyone justify this for me? i've stretched the 12a one as much as possible and at best i can connect it but then the pedal has no play and the throttle is pulled wide open.

what i basically need to know is if the 84/85 SE cable is indeed longer, or if i've just goofed something up..

thanks!
Reply
Old May 1, 2005 | 01:53 AM
  #2  
Nate13B's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 106
Likes: 0
From: FL
when i took out my FI and put a holley i had to put a 12a cable on my car. my 13b was to short.
Reply
Old May 1, 2005 | 02:03 AM
  #3  
Paradox's Avatar
Thread Starter
backyard tuner
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,265
Likes: 0
From: BC, Canada
do you have pics? i'd like to see how far the holley sits in comparison.

you've just got me more confused. haha
Reply
Old May 1, 2005 | 02:14 AM
  #4  
Nate13B's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 106
Likes: 0
From: FL
http://i5.photobucket.com/albums/y199/miraed/motor.jpg

http://i5.photobucket.com/albums/y19...ed/cars054.jpg

I know this because i had to wait and order the 12a cable because my FI one didnt reach. Are goind FI or carb?
Reply
Old May 1, 2005 | 02:48 AM
  #5  
Paradox's Avatar
Thread Starter
backyard tuner
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,265
Likes: 0
From: BC, Canada
i need pics of the linkage between the end of the throttle housing and the body, to show the length, however thanks!

i am EFI now, but the pain is wanting me to go back to a carb....

i have a pic somewhere of a 13b close up, i'll post it when i find it to compare.
Reply
Old May 1, 2005 | 10:10 AM
  #6  
grantmac's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 468
Likes: 1
From: Victoria, BC, Canada
Don't carb it man! With gas at $101.9/L you'll really regret it, especially because this is your "cheap" car. I do know that the S4 throttle cable is much shorter overall but has a longer inner cable relative to it's length if that makes sense.
Grant

P.S. I should be rocking the 13B and standalone next weekend.
Reply
Old May 6, 2005 | 02:31 AM
  #7  
Paradox's Avatar
Thread Starter
backyard tuner
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,265
Likes: 0
From: BC, Canada
just for future references (searches) the 12a (GS) and 13b (SE) cables are waaaaaay different. even with my engine mount having the engine sitting a little whacky the 13b cable swaps directly in without any problems. just installed it and it fits like glue. the 12a cable would have never fit even tho its longer, the housing takes up most of it, the 13b has a much shorter housing but the cable fits differently.

got the car together yet grant?
Reply
Old May 6, 2005 | 06:55 AM
  #8  
riceburner1r2001's Avatar
Rotary Freak
Tenured Member 05 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,758
Likes: 0
From: riverside county
101 damn thats cheap im paying 2.50 a gallon for gas
Reply
Old May 6, 2005 | 08:53 AM
  #9  
grantmac's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 468
Likes: 1
From: Victoria, BC, Canada
Dude, $101.9/L is like paying $3.59/gal so I'd say we're paying a little more than you guys. Paradox: I just finished the Megasquirt tonight (it's easy) and I'm going to install it this weekend, hopefully that'll have the car running.
Grant
Reply
Old May 6, 2005 | 09:33 AM
  #10  
Mills's Avatar
procrastination engineer
Tenured Member: 20 Years
Liked
iTrader: (1)
 
Joined: Mar 2003
Posts: 1,270
Likes: 1
From: up to my ass in alligators
I was going to say if you have the stock SE 13B intake you need the SE throttle cable.

I put a S4 intake manifold and throttle body on my SE and needed to bend the crap out of the cable bracket in order to keep the cruise from tugging on it all the time, I should've probably got a S4 cable, but it works...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
cdn
2nd Generation Non-Technical and pictures
0
Aug 11, 2015 08:59 PM




All times are GMT -5. The time now is 02:51 AM.