12a j port not hitting full power
#1
Newbie
Thread Starter
Join Date: Nov 2017
Location: Whakatane
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
12a j port not hitting full power
Hi there I have a 12a j port with a 4 barrel carby on it.dissy timing with points ignition.gilmore belt for timing marks.fuel pressure is at 5pounds in to carby.starts good runs ok but dies out wen I try to hit my secondary’s.not sure if it’s my timing or my jets in carby
#3
carb whisperer
Hi there I have a 12a j port with a 4 barrel carby on it.dissy timing with points ignition.gilmore belt for timing marks.fuel pressure is at 5pounds in to carby.starts good runs ok but dies out wen I try to hit my secondary’s.not sure if it’s my timing or my jets in carby
#4
What?
I don't know what you mean by "dissy timing" and "gilmore belt for timing marks" so I'm going to suggest you check the timing (and separation between leading and trailing) I guess.
I don't know what you mean by "dissy timing" and "gilmore belt for timing marks" so I'm going to suggest you check the timing (and separation between leading and trailing) I guess.
#5
Newbie
Thread Starter
Join Date: Nov 2017
Location: Whakatane
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
hay dont worry have got it sorted.now i have a s3 rx7 gearbox and i snapped the driveshaft yoke off.and have not been able to find it.was woundering if sum1 can tell me the splin number on output shaft on gearbox.as car is about a hour away from me and cant get to it atm
Thread
Thread Starter
Forum
Replies
Last Post
GUZZLR
Rotary Car Performance
4
04-01-03 01:21 AM